Owner's Manual

ManualsBrandsAudioSource ManualsHome AudioAD508

AudioSource$

AD508

Digital Multi-Zone Power Amplifier

FEATURES:

8 Channels

stereo zones)

Rear

mounted level controls

8 Independent inputs, 2 Bus inputs, 1 optical input

Bus 1

and

Bus 2 master level controls

Multi-function IR remote control

Normal, signal sensing,

and

trigger

power

modes

Rear

mounted treble

and

bass controls for bus 1 & 2

Phoenix-style speaker connectors

LED status indicator lights

Bridgeable channel outputs

Rack mountable (rack mount included)

SPECIFICATIONS

Stereo (8 ohm):

8 x 65W per channel, <0.2% THD+N

Stereo (4 ohm): 8 x 1

OOW

per channel, <0.2% THD+N

Bridged Mono

ohm): 200W, 1kHz, <0.2% THD+N

Frequency Response:

20Hz-

20kHz, +/-

OdB

Signal to Noise Ratio: 100dB below

SOW

output into 8 ohms

w/20kHz lowpass filter/A-Wgt

Channel Separation: 65dB

@ 1kHz, referred to 65W output

into 8 ohms

Input Sensitivity: Variable, 430mV for full output with

Input Level control at maximum

AC Power Consumption: 1000W maximum

Net Weight:

32.41bs

/14.7kgs

Gross Weight:

37.41bs

/17kgs

AudioSource®

13970

72nd

Ave

Portland,

97223

503

914.4688

www.audiosource

.net

Congratulations on

your

purchase

the AudioSource® AD508.

Please take a

few

moments to read this entire manual,

and

be sure to

retain this document

for

future reference. Please read

and

observe

all

safety instructions detailed on

page

NOTE:

any

part

this product is damaged

missing, please call

your

dealer

AudioSource® directly

1.877. 715.5439

503.914.4688.

Please

read

your

warranty

and

retain

your

receipt

and

original carton

for

possible future use.

For

information

about

AudioSource® electronics, speakers

and

accessories please visit www.audiosource.net

4.0"

(102mm)

75"

(375mm)

•

'---'

16.63" (423mm)

= =

== ==

AD508

Owner's

Manual

30117

Summary of content (5 pages)

PAGE 1
AudioSource$ AD508 Digital Multi-Zone Power Amplifier FEATURES: 8 Channels (4 stereo zones) 8 Rear mounted level controls 8 Independent inputs, 2 Bus inputs, 1 optical input Bus 1 and Bus 2 master level controls Multi-function IR remote control Normal, signal sensing, and trigger power modes Rear mounted treble and bass controls for bus 1 & 2 Phoenix-style speaker connectors LED status indicator lights Bridgeable channel outputs Rack mountable (rack mount included) SPECIFICATIONS Stereo (8 ohm): 8 x 65W
PAGE 2
AD508 OWNERS MANUAL CAUTION RISK OF ELECTRICAL SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE THE COVER. NO USER SERVICABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL! The exclamation point within an equilateral triangle is intended to alert the user of the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.
PAGE 3
AD508 OWNERS MANUAL ~.~MULTI-ZONE POWER AMPLIFIER ~ZONE~ 0 0 0 0 1 2 3 4 I I \ • FRONT PANELCONTROLS AD508 Figure 1. Front Panel 2. Zone Status Indicators Each pair of channels or zones has a bi-color LED to indicate its operational status. These indicators provide quick and easy troubleshooting of the system.
PAGE 4
AD508 OWNERS MANUAL (Page 3 Con'() 14. AC Voltage Switch The unit is set at the factory for 115V U.S. operation; simply connect the included lEG power cord to your wall outlet. For 230V operation, move the voltage selector switch to the 230V position. When operating at 230V the internal fuse located in the lEG socket should also be changed. In most 230V applications a separate power cord will be required and is not included. 15.
PAGE 5
Thank you for purchasing your Audiosource amplifier from Crutchfield. The manufactures warranty for this amplifier is 2 years, however thanks to our partnership with Audiosource, this has been extended by Audiosource to 3 years from the original date of purchase. During this timeframe Crutchfield will, at Crutchfield’s sole discretion, exchange the amplifier if it is found to be defective.