Operation Manual

VIRTUALITY-Skill - DJ-dedicated MIDI controller
Page 12
English
• Use SHIFT + HEADPHONE to monitor the
MASTER output and a track simultaneously.
Position the fader on the left to increase the MASTER
monitoring output, position it on the right to increase
the track volume output.
• Use headphones to monitor the track you are
about to play.
• Use the corresponding PFL button to listen to a
track.
• Use the HEADPHONE control knob to adjust the
output level.
• Press OUT to exit the loop.
• Press OUT while playing a track to activate a
4-beat automatic loop .
• Press IN to replay the loop.
• Use the IN button to set the starting point of your
loop, use OUT to set the exit point.
• Use SHIFT + IN to divide the duration of your loop
by two.
• Use SHIFT + IN to double the duration of your
loop.
Creating loops
Using headphones
• Use the EFX (S) control knob to select an effect.
• Use FX1 and FX2 to configure your effect.
Please note that some effects do not have 2
adjustable parameters and FX2 might not have any
function.
• Press ON/OFF to launch the effect. Press this
button again to stop it.
Using effects
• Your Virtuality-SKill features preset samples.
You can access them via the control knob used for
effects.
Press SHIFT and use the EFX (S) control knob.
• Use FX1 (S) to adjust the selected sample volume
output.
• Press SHIFT and ON/OFF to launch the sample,
press again to stop it.
Using samples