9822 - Version 1 / 10-2010 USER GUIDE DJ-dedicated MIDI controller to play and mix files
English Page 2 VIRTUALITY-Skill - DJ-dedicated MIDI controller
English VIRTUALITY-Skill - DJ-dedicated MIDI controller 1 - Safety information Important safety information This unit is intended for indoor use only. Do not use it in a wet, or extremely cold/hot locations. Failure to follow these safety instructions could result in fire, electric shock, injury, or damage to this product or other property. This product contains non-isolated electrical components. Do not undertake any maintenance operation when it is switched on as it may result in electric shock.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller Instructions and recommendations 1 - Please read carefully : We strongly recommend to read carefully and understand the safety instructions before attempting to operate this unit. 2 - Please keep this manual : We strongly recommend to keep this manual with the unit for future reference. 3 - Operate carefully this product : We strongly recommend to take into consideration every safety instruction.
VIRTUALITY-Skill - DJ-dedicated MIDI controller English 2 - Main characteristics DJ-dedicated MIDI controller with built-in sound card and software. • USB connection (Compatible with USB1 or 2) in MIDI mode. • The MIDI interface allows you to audio files mixing and use your computer for effects, samples, equalization, crossfader... when connected to your computer.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller 4 - Preparation Checking the package contents The package must contain the following articles: Your controller This user guide 1 USB cable 1 transport cover Setting up your SKILL • Install your controller over an even surface • Please make sure your controller is installed in a properly ventilated area, unexposed to sun rays, excessive temperature changes or humidity.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller 5 - Overview Front panel 1 1 2 2 Microphone input Connect a Jack 6.35 microphone here. Headphones output Connect your stereo Jack 3.5 headphones here. Rear panel 1 1 Master output Line-level output via RCA socket. This analogue output allows you to send your processed signal to an amplifier or mixing desk. 2 Wheel sensors These two control knobs allow you to adapt the sensitivity of each jog wheel.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller Top view 13 12 11 8 18 14 20 19 24 15 10 9 16 23 17 7 6 25 5 26 4 21 1 2 3 22 Players area • All the functions described below depend on the software used with your controller. • As your controller is supplied with the VIRTUALITY-Screen LE software, functions described below refer to this software in relation to your VIRTUALITY-SKill. • If using another software, please refer to its user guide.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller 2 (HOT CUE2) Button : Allows you to start your track from the CUE point set via the SET CUE button. HOT CUE2 : Press SHIFT and HOT CUE2 simultaneously to add a second CUE point. 3 (HOT CUE3) button : Each pressure on this button alternates between pause and play. HOT CUE3 : Press shift and HOT CUE3 to add a third CUE point. 4 JOG WHEELS Their functions depend on the current mode (Normal, Search or Scratch).
English 13 14 SELECT (SAMPLE) Control knob SELECT: Allows you to select effects. SAMPLE: While holding SHIFT, allows you to select preset samples. SYNC (LOOP) Button SYNC: Allows you to synchronise the BPM of two tracks by increasing/decreasing their speed of the track you want to synchronise. LOOP: Gives you access to saved loops. Mixing and equalization area 15 HIGH (KEY) Button HIGH: Adjusts the high frequencies of the current track. KEY: While holding SHIFT, adjusts the Master Tone level.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller 6 - Basic operations Browsing through folders and selecting a track • Use the TRACK knob to browse through folders and files. • Use the LOAD A or LOAD B button to load the selected track. or • Use SHIFT + FOLDER to go up the folder tree. • You can also use the TRACK button to send the track to the inactive channel. • Use the TRACK knob to enter a folder or select a file.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller Creating loops • Use the IN button to set the starting point of your loop, use OUT to set the exit point. • Press OUT to exit the loop. • Press OUT while playing a track to activate a • Use SHIFT + IN to divide the duration of your loop by two. • Use SHIFT + IN to double the duration of your loop. 4-beat automatic loop . • Press IN to replay the loop. Using headphones • Use headphones to monitor the track you are about to play.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller 7 - Installing and configuring the Virtuality-screen LE software VIRTUALITY-Screen LE is not supplied with your VIRTUALITY-SKill. In order to download it, please go on www.audiophony.com to find the product page of your VIRTUALITY-SKill. Click on the download link. You will then be redirected to the Atomix Production, the developer's website. Save the installation pack, then launch the setup wizard.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller The following steps describe the Audio driver configuration process: IMPORTANT ! You must connect your VIRTUALITY-SKill to your computer before launching its software. 1 During the first connection to the software, a window asking you to type a serial number will appear. This number is located at the rear of your device.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller 8 - MIDI Please find below the MIDI mapping of your device. This map will allow you to configure your software (if you are not using VIRTUALITY-Screen LE). You will find the lastest information, firmwares and updates available on www.audiophony.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller Selectors SKill Midi CC Note MIDI MIDI 1 +SHIFT LEFT: Select (Effect/Sample) 0x0B E0 0x10 F0 0x11 RIGHT: Select (Effect/Sample) 0x0B F# 0 0x12 G0 0x13 TRACK 0x0B G# 0 0x14 A0 0x15 Pressing jog wheels SKill Midi Note Note MIDI MIDI 1 LEFT JOG WHEEL: PRESSURE 0x09 B2 0x2F RIGHT JOG WHEEL: PRESSURE 0x09 Bb 2 0x2E Jog wheels SKill CC Note MIDI MIDI 1 LEFT JOG WHEEL 0x0B G# 1 0x20 A1 0x21 RIGHT JOG WHEEL 0x0B
English VIRTUALITY-Skill - DJ-dedicated MIDI controller Control knobs SKill Midi CC MIDI Note MIDI 1 + SHIFT LEFT : FX1 (SAMP. VOL.) 0x0B C3 0x30 G# 3 0x38 LEFT : FX2 0x0B C# 3 0x31 A3 0x39 LEFT : GAIN 0x0B D3 0x32 Bb 3 0x3A LEFT : HIGH (KEY) 0x0B Eb 3 0x33 B3 0x3B LEFT : MID 0x0B E3 0x34 C4 0x3C LEFT : LOW 0x0B F3 0x35 C# 4 0x3D LEFT : Pitch 0x0B F# 3 0x36 D4 0x3E LEFT : Channel FADERS 0x0B G3 0x37 Eb 4 0x3F RIGHT : FX1 (SAMP. VOL.
English VIRTUALITY-Skill - DJ-dedicated MIDI controller 9 - Standard installation COMPUTER POWERED SPEAKERS MIC HEADPHONES Page 18
VIRTUALITY-Skill - DJ-dedicated MIDI controller English 10 - Notes Page 19
Because AUDIOPHONY® takes the utmost care in its products to make sure you only get the best possible quality, our products are subjects to modifications without prior notice. That is why technical specifications and the products physical configuration might differ from the illustrations. Make sure you get the latest news and updates about the AUDIOPHONY® products on www.audiophony.com AUDIOPHONY® is a trademark of HITMUSIC S.A.