Operation Manual

MYA8C- 8-Channel console including 2 phones, 7 lines, 3 micros and 1 USB port
Page 7
English
8
Unbalanced MASTER B output
Stereo unbalanced output. The volume can be adjusted
via the VOL B fader.
9
Record output
Allows you to connect a recording system to your
console. The output level is not affected by the Master
volume but the faders of each channel.
10
Mic 2 and 3 inputs
Allow you to connect a microphone with Jack 6.35
connector.
11
T. THRESHOLD
This knob allows you to adjust the volume of each
microphone beyond which the line level, phonos and
USB inputs will be dimmed when the Talkover function
is activated.
The attenuation level can be adjusted via the front panel,
please refer to the front panel description further in this
guide.
12
USB Port
This input allows you to connect a computer equipped
with USB ports. Your MYA8C acts like a sound card to
your computer. Your computer will take a few moments
to identify the internal interface. Once identified, your
MYA8C will be detected as audio device.
The USB port allows you to play and record audio data
directly from your computer.
All you need is plugging a USB cable from your computer
to your console and the drivers will automatically launch
their installation. You will then be able to read any audio
file such as MP3, WMA, WAV...
You can also directly record your set onto your computer.
The USB port can record and play at the same time
thanks to the Full duplex system.
The USB interface of your mixer is detected as a
standard USB sound card (USB Audio Device or USB
Audio CODEC).
All audio signals from your computer will be carried
to the console via USB cable, combining a vast audio
database with the ease of use of your MYA8C.