Operation Manual

MYA8C- 8-Channel console including 2 phones, 7 lines, 3 micros and 1 USB port
Page 6
English
5
Source selector
Allow you to select the type of device connected on
these channels. Several devices can be connected
on the same channel but only one per channel can be
activated. The "Phono" position is the standard settings
to connect a turntable.
6
Balanced MASTER A output
This balanced XLR stereo output allows you to carry
sound signals over long distances without quality losses.
This is the best system for sound processing with
balanced outputs. The volume of this output can be
adjusted via the VOL A fader.
7
Unbalanced MASTER A output
Unbalanced stero output carrying the same signal than
the balanced MASTER A output.
1
Power supply socket
Connect the supplied power cord here.
Only use the supplied power cord or equivalent cords.
2
Power switch
3
Line level inputs
These inputs allow you to connect a CD or cassette
player, Tuner, or any other line level device.
Turntables cannot be connected via these inputs.
4
Phono inputs
These inputs allow you to connect turntables.
Do not connect any line level device to these inputs.
Connect the ground of your turntables to the ground
pins. This will prevent any "snoring" or parasitic noises.
Rear panel
4 - Presentation
Checking the package contents
The package must contain the following articles:
Your MYA8C
The user guide
1 CEE Power cord
Installation
• Install your device over an even surface.
• Please make sure your mixer is set up in a ventilated area, unexposed to sun rays, excessive temperatures
or humidity.
3 - Preparation
1
2
3
6 7 9 3 10 12
8 4
11
5 5
4