User`s manual

47
· If you adjust an option of the Global Setup menu during playback,
pressing key stop / set shortly (less than 2 seconds) will still stop
playback (refer to section 'Playing discs' on page 32).
· If you make no adjustments for longer than 12 seconds the ART G3
will leave the Global Setup menu automatically.
· During adjustments of the display brightness is set to 100% for better
readability. After leaving the menu the user selected brightness level
will be restored.
· If you switch off the unit to stand-by mode all adjustments will be
stored in the non-volatile memory of the ART G3. Even after discon-
necting from the mains your ART G3 will still remember your set-
tings.
In the following the options of the Global Setup menu are explained
in detail.
10.1 Set SPDIF Digital Input
To select the active digital input of the ART G3, press the stop / set-key
once for at least 2 seconds. Use keys back / pause and skip / play to select
the preferred digital input.
IN 1 (electrical) or USB Use this option to activate the Digi-
tal Audio IN 1 15 of the ART G3.
IN 2 (optical) Use this option to activate the opti-
cal input Digital Audio IN 1 16 .
Tip
· On the Audionet Metal Remote Control RC 1 use setup key ä get to
menu item Set SPDIF Digital Input. Use keys 9 and : to
select the preferred digital input.