User`s manual

Prog:

Track Time

02/17 Track min sec

► 19 32 : 17

Now you would like to erase track no. 18 from the playlist.

Repeat pressing 7 until line 2 of the display reads:

Track 18 ž 04 of 05

Erase track no. 18 (respectively program step 4) from the playlist by

pressing <. The new playback order is:

Program step 1 2 3 4

Track no. 07 12 09 03

Important

· This function is only available if you use the Audionet Metal Remote

Control RC 1!

9.5.2 Playing a playlist

As soon as you finished compiling a playlist you can start playback by

pressing key 4/; of the Audionet Metal Remote Control RC 1 or key

skip / play on the front panel. Playback starts now with the first track pro-

grammed into the playlist.

The display indicates playlist playback by the symbol Prog: in the up-

per left corner. Directly below you will find the number of the current

program step and the total number of program steps of the playlist:

In the example above track no. 19 is playing. This is step 2 of 17 in the

playlist.

Note

· If the random play function is active symbol Prog: is replaced by

symbol Random in the display. Nevertheless, the number of the cur-

rent program step playing and the total number of program steps in

the playlist is still indicated.

· If you stop playback the playlist still resides in the memory. If you

start playback again, the playlist will be played again.

· To delete a playlist, please refer to section 'Delete a playlist' on page

45.

· If you would like to stop playing a playlist during playback and re-

sume normal playback press setup key ä of the Audionet Metal Re-

mote Control RC 1 5 times to get to the Program Play Options.