User`s manual

11
3. Connect both (!!) units (ART G3 and EPS / EPX) to mains.
4. Switch on the EPS / EPX at the back panel first.
5. Use key power at the front panel or the key ART of the Audionet
Metal Remote Control RC 1 to switch on the ART G3. The
ART G3 is now ready to use and gets its power from the external
power supply EPS / EPX.
6. To switch off the ART G3 into stand-by mode, use the key power
on the front panel or key ART of the Audionet Metal Remote
Control RC 1.
Important
· Never switch on or off the EPS / EPX on its back panel while the
ART G3 is switched on or during playback.
· For further information referring to the external power supply
EPS / EPX please consult its user's manual.
Tip
· Use a high quality cable (for example the Audionet P10) to connect
the EPS / EPX to mains. The sound will improve.