User`s manual

Chapter 4 Communications Control
4-5
4
 Communications Protocol
● Make communications specification settings.
1. Make communications specification settings for the HL-G1.
The table in "4-1 Communications Specifications" - "Specifications"
shows the communications specifications for the HL-G1. Make settings
according to the operating conditions.
2. Make communication specifications for the host device.
Read through the operation manual of the external host device and change the
communications settings for the host device in conformity with the settings
for the HL-G1. Otherwise, make settings for the HL-G1 in conformity with
the settings for the external host device.
 Communications Condition Changes
When the baud rate is changed, save the setting and restart the sensor head so
that the setting will be reflected.