User`s manual

Chapter 3 Function
3-49
3
 Buffering Mode
There are two types of buffering modes, either one of which can be selected.
"Continuous Mode" is set by default.
Continuous Mode
• Data accumulation to the built-in memory of the sensor head start with the start of
buffering.
• Accumulation will stop when the amount of accumulation reaches the setting
value or when buffering operation stops.
Trigger Mode
• When buffering operation starts, trigger generation will be set to stand-by status.
• The measurement data before and after the trigger point where the trigger is generated is
accumulated into the built-in memory of the sensor head.
• Accumulation will stop when the amount of accumulation reaches the setting value or
when buffering operation stops.
Accumulation of measurement data
Measurement operation
Buffering start
Buffering stop or accumulation
amount reached
Trigger generated
(Trigger point)
Accumulation of measurement data Meas. ope.
Buffering start
Buffering stop or accumulation
amount reached
Stand-by