User`s manual

Chapter 3 Function
3-38
3
 Sending Delay Time
This is a useful function if the connection mode is set to RS-485 multi.
Select the sensor's delay time in response to each command transmitted from
the host device.
Setting Function
Panel
display
Setting Function
Panel
display
0 No delay time 10 Delay time 10ms
0.1 Delay time 0.1ms 20
〃
20ms
0.2
〃
0.2ms 50
〃
50ms
0.5
〃
0.5ms 100
〃
100ms
1
〃
1ms 200
〃
200ms
2
〃
2ms 500
〃
500ms
5
〃
5ms 1000
〃
1000ms
* indicates the default value.
● Setting Procedure
1
Display the "COM Setting" screen while
in setting mode.
2
Press the [ENTER] key. The "Terminating
Resistor Selection" screen will be displayed.
3
Press the [DOWN] key four times. The
"Sending Delay Time" screen will be
displayed.
4
Press the [ENTER] key. The delay time
setting will be displayed.
5
Press the [UP]/[DOWN] key to change the
connection mode. (Example: Changing the
delay time to 20 ms.)
6
Press the [ENTER] key to determine the
sending delay time setting.