User`s manual

Chapter 3 Function
3-21
3
 Zero-set OFF
This function cancels the zero set for measurement values.
Setting Function Panel display
Reset
The zero set is not canceled.
Hold
The zero set is canceled.
Supplemental remarks
• External multi input (MI) can turn the zero set ON and OFF. (
r
efer to "2-1
Functions and Arrangements of I/O Terminal Block.")
● Setting Procedure
1
Display the "Data Processing Setting" screen
while the system is in setting mode.
2
Press the [ENTER] key. The "Average
Time" screen will be displayed.
3
Press the [DOWN] key four times. The
"Zero-set OFF" screen will be displayed.
4
Press the [ENTER] key. "Yes/No" will be
displayed.
5
Press the [UP]/[DOWN] key to make
"Yes/No" changes. (Example:
Maintaining the zero-set state.)
6
Press the [ENTER] key.