User`s manual

Chapter 3 Function
3-19
3
 Span
The system can output measurement values with a span (factor) multiplied.
Final measurement value = Span x measurement value + offset
Setting range Function Initial value
0.1000 to
+9.9999
Set a span in a range from
0.1000 to +9.9999.
● Setting Procedure
1
Display the "Data Processing Setting"
screen while the system is in setting mode.
2
Press the [ENTER] key. The "Average
Time" screen will be displayed.
3
Press the [DOWN] key twice. The "Span"
screen will be displayed.
4
Press the [ENTER] key. The present
span will be displayed. The leftmost digit
will be selected.
5
Press the [UP]/[DOWN] keys together to
change the selected digit.
6
Press the [UP]/[DOWN] key to change the
value of the selected digit. (Example:
Changing the value to 2.0000.)
7
Press the [ENTER] key to determine the
span.
Output
Final meas. value
Meas. value
Spanned meas. value
Offset value
Measurem
ent range
0
Center point of measurement