User`s manual

Chapter 2 I/O Terminal Block

2-3

* MI input varies with the period of input as shown below.

Period of input Function

30 ms

Zero-set ON

80 ms

Reset

130 ms

Memory change (M0)

180 ms

Memory change (M1)

230 ms

Memory change (M2)

280 ms

Memory change (M3)

330 ms

Teaching a (Determines displacement judgment value a)

380 ms

Teaching b (Determines displacement judgment value b)

430 ms

Zero-set OFF (Cancel)

480 ms

Save

530 ms

Laser ON

580 ms

Laser OFF

Enter MI input for the desired period with a tolerance of ±10 ms (T±10 ms).

Two or more MI inputs can be entered in sequence on the condition that a

minimum interval of 10 ms is set between adjacent MI inputs.

• No SD/RD lines are prepared for HL-G1□□-A-C5 standard types.

• The action of NP switching input is determined by the input state of the sensor

head with the power turned ON.

• The sensor head does not save setting changes made over the multi-input line.

Save the settings over the multi-input line, through the panel, with the

communications command, or with the operation of the console if the settings

need to be maintained after the system is turned OFF.

Input time T

MI in