User`s manual

Chapter 2 I/O Terminal Block
2-2
2
2-1 Functions and Arrangements of I/O Terminal Block
Analog Output Lines
No. Name Function Wiring color
7 A(V)
Analog voltage output
8 AGND
Analog ground
Shield single
conductor
Black
9 A(I)
Analog current output
10 AGND
Analog ground
Shield single
conductor
Gray
I/O Terminal Block
No. Name Function Wiring color
1 OUT1
Judgment output 1 Black
2 OUT2
Judgment output 2 White
3 OUT3
Judgment output 3 or alarm output Gray
4 TM
Timing input Pink
5 MI
Zero-set ON, Zero-set OFF, Reset, Memory
change, Teaching, Save, and Laser Control inputs
Violet
6 NP
NPN/PNP type switching input Pink/Violet
11 +SD
Transmission data Green
12 -SD
Transmission data
Twisted-
pair wire
Sky Blue
13 +RD
Reception data Orange
14 -RD
Reception data
Twisted-
pair wire
Yellow
15 SG
Signal ground Shield
16 + V
24 VDC input for power supply Brown
17 0V
Power supply ground Blue
Line colors on a label for connection included in sensor head produced before
December 2010 describes line colors before this modification. Therefore, kindly
confirm the following content before use.
Content of Modification
Before changes After
No.
Name Function
Wiring color Wiring color
11 +SD
Transmission data
Black
Green
12 -SD
Transmission data
Twisted-
pair wire
White
Sky Blue
13 +RD
Reception data
Orange
Orange
14 -RD
Reception data
Twisted-
pair wire
White
Yellow