User`s manual

Chapter 6 Specifications
6-5
6
● Specular reflection Type
Standard
Type
HL-G103A-RA-C5 HL-G105A-RA-C5 HL-G108A-RA-C5
Model No.
High-func
tion Type
HL-G103A-RS-J HL-G105A-RS-J HL-G108A-RS-J
Supply voltage
24 VDC ±10% including ripple 0.5 V (P-P)
Current consumption
100 mA max.
Measurement method
Specular reflection
Measurement center
distance
26.3 mm 47.3 mm 82.9 mm
Measurement range
±2 mm ±5 mm ±10 mm
Beam source
Red semiconductor laser Class 1 (JIS/IEC/GB/FDA laser notice No. 50)
Max output: 0.39 mW, Emission peak wavelength: 655 nm
Beam diameter (
*1
)
0.1×0.1 mm 0.2×0.2 mm
Beam receiving
element
CMOS image sensor
Resolution
0.5 μm 1.5 μm 2.5 μm
Linearity
±0.2% F.S.
Temperature
characteristics
±0.08% F.S./°C
Sampling cycle
200 μs, 500 μs, 1 ms, 2 ms
Voltage
Output range: 0 to 10.5 V (normal), 11 V (at alarm)
Output impedance: 100

Analog
output
Current
Output range: 3.2 to 20.8 mA (normal), 21.6 mA (at alarm)
Load impedance: 300

max.
Judgment output or alarm output (switchable)
NPN open-collector transistor/PNP open-collector transistor (switchable)
OUT1
OUT2
OUT3
<Settings for NPN>
Peak in-flow current: 50 mA
Applied voltage: 3 to 24 VDC (between
output and 0 V)
Residual voltage: 2 V max. (at in-flow
current of 50 mA)
Leak current
：
0.1mA or less
<Settings for PNP>
Peak out-flow current: 50 mA
Residual voltage: 2.8 V max. (at
in-flow current of 50 mA)
Leak current
：
0.1mA or less
Output operation
Open when the output is ON.
Short-circuit
protection
Incorporated (Auto-reset)
NP switching input
At 0 V: NPN open-collector output
At supply voltage of 24 VDC: PNP open-collector output
Timing input
NPN operation: ON when connecting or connected to 0 V (depending on
settings)
PNP operation: ON when connecting or connected to positive terminal of
external power supply (depending on settings)