User`s manual

Chapter 4 Communications Control
4-9
4
● Data Setting/Operation Instruction Command
Data setting/operation instruction command formats are used to make data
settings or give operating instructions.
Request communication data
Normal response data
Setting an average number of 256 times for sensor 02.
Request communication data
Normal response data
FORMAT
2
Value Setting
The following value setting command formats are used to set seven-digit
numeric values (measurement values and numeric values) with the decimal
point omitted.
● Read Command
Request communication data
Ex
BCC
% $ W
CR
Sender no. Command
% # W
±
Destination no. Command
BCC
CR
0 1 2 3 4
Data block: 1-character symbol +
5-character integral part (no zero suppress)
BCC
% # R
CR
Destination no. Command
% 0 2 $ W A V
CR
**
% 0 2 # W A V
+
CR
**0 0 0 0 4