User`s manual

ManualsBrandsAudiomatica ManualsAmplifierMODEL 5

Table Of Contents

CONTENTS
1 INTRODUCTION
- 1.1 ABOUT THIS MANUAL
  - 1.1.1 WHAT THIS USER MANUAL DOES COVER
- 1.2 GENERAL CONDITIONS AND WARRANTY
2 THE CLIO SYSTEM
- 2.1 THE FW-01 FIREWIRE AUDIO INTERFACE
  - 2.1.1 TECHNICAL SPECIFICATIONS
- 2.2 THE MIC-01 MICROPHONE
- 2.3 THE PRE-01 MICROPHONE PREAMPLIFIER
  - 2.3.1 TECHNICAL SPECIFICATION
  - 2.3.2 USE OF THE PREAMPLIFIER
- 2.4 THE QCBOX MODEL 5 POWER AMPLIFIER, SWITCHING AND TESTING BOX
  - 2.4.1 TECHNICAL SPECIFICATIONS
3 CLIO INSTALLATION
- 3.1 MINIMUM PC CONFIGURATION
- 3.2 FW-01 DRIVERS INSTALLATION UNDER WINDOWS XP
- 3.3 FW-01 DRIVERS INSTALLATION UNDER WINDOWS VISTA AND 7
- 3.4 SOFTWARE INSTALLATION
- 3.5 THE 'CLIO BOX'
- 3.6 RUNNING CLIO FOR THE FIRST TIME
  - 3.6.1 INITIAL TEST
- 3.7 SYSTEM CALIBRATION
  - 3.7.1 CALIBRATION VALIDATION
- 3.8 CLIO SERIAL NUMBER AND DEMO MODE
- 3.9 TROUBLESHOOTING CLIO INSTALLATION
4 CLIO BASICS
- 4.1 INTRODUCTION
- 4.2 GETTING HELP
- 4.3 CLIO DESKTOP
- 4.4 MAIN TOOLBAR
- 4.5 HARDWARE CONTROLS TOOLBAR
- 4.6 QCBOX & LPT CONTROLS
  - 4.6.1 CONTROLLING THE QCBOX 5 POWER AMPLIFIER, SWITCHING AND MEASURING BOX
- 4.7 CONTROLLING TURNTABLES
  - 4.7.1 TURNTABLES OPTIONS DIALOG
- 4.8 MAIN MENU AND SHORTCUTS
- 4.9 BASIC CONNECTIONS
5 SYSTEM OPERATIONS AND SETTINGS
- 5.1 INTRODUCTION
- 5.2 REGISTERED FILE EXTENSIONS
- 5.3 FILE MENU AND MAIN TOOLBAR BUTTONS
- 5.4 OPTIONS
- 5.5 DESKTOP MANAGEMENT
- 5.6 CALIBRATION
- 5.7 STARTUP OPTIONS AND GLOBAL SETTINGS
  - 5.7.1 SAVING MEASUREMENT SETTINGS
6 COMMON MEASUREMENT INTERFACE
- 6.1 INTRODUCTION
- 6.2 UNDERSTANDING THE DISPLAY IN FRONT OF YOU
- 6.3 BUTTONS AND CHECKBOXES
- 6.4 HOW TO ZOOM
- 6.5 SHORTCUTS AND MOUSE ACTIONS
- 6.6 THE MLS TIME DOMAIN DISPLAY
7 SIGNAL GENERATOR
- 7.1 INTRODUCTION
- 7.2 SINUSOID
- 7.3 TWO SINUSOIDS
- 7.4 MULTITONES
- 7.5 WHITE NOISE
- 7.6 MLS
- 7.7 CHIRPS
- 7.8 PINK NOISE
- 7.9 ALL TONES
- 7.10 SIGNAL FILES
  - 7.10.1 SAVING SIGNAL FILES
8 MULTI-METER
- 8.1 INTRODUCTION
- 8.2 MULTI-METER CONTROL PANEL
  - 8.2.1 TOOLBAR BUTTONS
  - 8.2.2 TOOLBAR DROP DOWN LISTS
- 8.3 USING THE MULTI-METER
  - 8.3.1 THE MINIMIZED STATE
  - 8.3.2 CAPTURING THE GLOBAL REFERENCE LEVEL
- 8.4 THE SOUND LEVEL METER
  - 8.4.1 CAPTURING THE MICROPHONE SENSITIVITY
- 8.5 THE LCR METER
  - 8.5.1 MEASURING AN INDUCTOR
- 8.6 INTERACTION BETWEEN THE MULTI-METER AND FFT
9 FFT, RTA AND “LIVE” TRANSFER FUNCTION
- 9.1 INTRODUCTION
- 9.2 NARROWBAND FFT ANALYZER
  - 9.2.1 TOOLBAR BUTTONS, DROP DOWN LISTS AND DISPLAYS
- 9.3 RTA - OCTAVE BANDS ANALYZER
  - 9.3.1 DEDICATED TOOLBAR FUNCTIONS
- 9.4 FFT SETTINGS DIALOG
- 9.5 FFT AND RTA OPERATION
- 9.6 AVERAGING
- 9.7 TIME DATA DISPLAY (OSCILLOSCOPE)
- 9.8 FFT AND MULTI-METER
- 9.9 FFT AND Leq ANALIZER
- 9.10 “LIVE” TRANSFER FUNCTION ANALYZER
  - 9.10.1 DEDICATED ‘LIVE’ TOOLBAR FUNCTIONS
  - 9.10.2 USING CLIO DURING A LIVE PERFORMANCE
10 MLS & LOG CHIRP
- 10.1 INTRODUCTION
- 10.2 MLS & LOG CHIRP CONTROL PANEL
- 10.3 IMPULSE RESPONSE CONTROL PANEL
  - 10.3.1 TOOLBAR BUTTONS
- 10.4 MEASURING FREQUENCY RESPONSE
- 10.5 OTHER TIME DOMAIN INFORMATION
- 10.6 PROCESSING TOOLS BY EXAMPLE
- 10.7 MLS Vs. LOG CHIRP
- 10.8 RELATED MENUS
11 SINUSOIDAL
- 11.1 INTRODUCTION
- 11.2 SINUSOIDAL CONTROL PANEL
- 11.3 HOW TO MEASURE A SIMULTANEOUS FREQUENCY AND IMPEDANCE RESPONSE OF A LOUDSPEAKER
- 11.4 A BRIEF DESCRIPTION ON SETTINGS EFFECTS
- 11.5 DISTORTION AND SETTINGS
12 WATERFALL , DIRECTIVITY & 3D
- 12.1 INTRODUCTION
- 12.2 WATERFALL, DIRECTIVITY & 3D CONTROL PANEL
  - 12.2.1 COMMON TOOLBAR BUTTONS AND DROP DOWN LISTS
- 12.3 WATERFALL SPECIFIC CONTROLS
  - 12.3.1 WATERFALL SETTINGS
  - 12.3.2 WATERFALL OPERATION
- 12.4 MAKING A CUMULATIVE SPECTRAL DECAY
- 12.5 DIRECTIVITY SPECIFIC CONTROLS
  - 12.5.1 DIRECTIVITY SETTINGS AND OPERATION
- 12.6 MEASURING LOUDSPEAKER SINGLE POLAR DATA (1D MODE)
- 12.7 REPRESENTING SINGLE POLAR DATA
- 12.8 3D SPECIFIC CONTROLS
  - 12.8.1 3D SETTINGS AND OPERATION
- 12.9 MEASURING LOUDSPEAKER SINGLE POLAR DATA (3D MODE)
- 12.10 MEASURING FULL SPHERE LOUDSPEAKER POLAR DATA (3D MODE)
- 12.11 REPRESENTING 3D BALLOON DATA
- 12.12 EXPORT 3D BALLOON DATA
13 MEASURING IMPEDANCE AND T&S PARAMETERS
- 13.1 INTRODUCTION
- 13.2 GENERALS
- 13.3 INTERNAL MODE
- 13.4 I SENSE
- 13.5 CONSTANT VOLTAGE & CONSTANT CURRENT
  - 13.5.1 CONSTANT VOLTAGE
  - 13.5.2 CONSTANT CURRENT
- 13.6 IMPEDANCE: SINUSOIDAL OR MLS
- 13.7 THIELE & SMALL PARAMETERS
14 LINEARITY & DISTORTION
- 14.1 INTRODUCTION
- 14.2 LINEARITY & DISTORTION CONTROL PANEL
  - 14.2.1 TOOLBAR DROP DOWN LIST
  - 14.2.2 LINEARITY & DISTORTION SETTINGS DIALOG
15 ACOUSTICAL PARAMETERS
- 15.1 INTRODUCTION
- 15.2 THE ACOUSTICAL PARAMETERS CONTROL PANEL
  - 15.2.1 TOOLBAR BUTTONS AND DROP DOWN LISTS
  - 15.2.2 INTERACTION WITH THE A.P. CONTROL PANEL
- 15.3 ACOUSTICAL PARAMETERS SETTINGS
- 15.4 THE CALCULATED ACOUSTICAL PARAMETERS
- 15.5 NOTES ABOUT ACOUSTICAL PARAMETERS MEASUREMENT
- 15.6 STI CALCULATION
16 Leq LEVEL ANALYSIS
- 16.1 INTRODUCTION
- 16.2 THE Leq CONTROL PANEL
  - 16.2.1 TOOLBAR BUTTONS AND DROP DOWN LISTS
  - 16.2.2 INTERACTION WITH THE Leq CONTROL PANEL
- 16.3 Leq SETTINGS
17 WOW AND FLUTTER
- 17.1 INTRODUCTION
- 17.2 WOW & FLUTTER CONTROL PANEL
  - 17.2.1 TOOLBAR BUTTON
  - 17.2.2 TOOLBAR DROP DOWN LIST
- 17.3 FEATURES
18 WAVELET ANALYSIS
- 18.1 INTRODUCTION
- 18.2 WAVELET ANALYSIS CONTROL PANEL
  - 18.2.1 COMMON TOOLBAR BUTTONS AND DROP DOWN LISTS
- 18.3 WAVELET ANALYSIS SETTINGS
- 18.4 WAVELET ANALYSIS OPERATION
  - 18.4.1 TRADING BANDWIDTH AND TIME RESOLUTION
  - 18.4.2 NORMALIZED SCALOGRAMS
BIBLIOGRAPHY
NORMS

5.3.2 EXPORTING DATA

CLIO is able to export the currently active measurement in an ASCII file (*.txt).

Fig.5.4 Export dialog

Upon performing this choice you will be prompted by the Export dialog. Depending

on the measurement menu you are working with, it will be possible to choose

different data to export. Here is a list of the possibilities, menu by menu:

MLS > Display Frequency Data

The program will export the frequency data as they are displayed on the screen,

with resolution variable from 256 to 2048 points, regardless the current MLS

size.

MLS > FFT Frequency Data

The program will export the frequency data with the resolution of the current

MLS size.

MLS > Time Data

The program will export the acquired impulse response or active post process.

FFT > Display Frequency Data

The program will export the processed frequency data as they are displayed on

the screen, with its internal resolution of 2048 points, regardless the current FFT

size.

FFT > FFT Frequency Data

The program will export the processed frequency data with the resolution of the

current FFT size.

FFT > Last FFT Data

The program will export the last calculated FFT frequency data with the

resolution of the current FFT size.

FFT > Last Time Data

The program will export the last captured time data with the resolution of the

current FFT size.

Sinusoidal > Frequency Data

The program will export the acquired frequency data with their fraction of octave

frequency resolution.

Sinusoidal > Frequency + Distortion Data

As above plus THD and R&B data.

T&S > T&S Parameter

Linearity&Distortion > Distortion data

Wow&Flutter > Wow&Flutter data

5 SYSTEM OPERATIONS AND SETTINGS 61