User`s manual

ManualsBrandsAudiomatica ManualsAmplifierMODEL 5

100

Table Of Contents

CONTENTS
1 INTRODUCTION
- 1.1 ABOUT THIS MANUAL
  - 1.1.1 WHAT THIS USER MANUAL DOES COVER
- 1.2 GENERAL CONDITIONS AND WARRANTY
2 THE CLIO SYSTEM
- 2.1 THE FW-01 FIREWIRE AUDIO INTERFACE
  - 2.1.1 TECHNICAL SPECIFICATIONS
- 2.2 THE MIC-01 MICROPHONE
- 2.3 THE PRE-01 MICROPHONE PREAMPLIFIER
  - 2.3.1 TECHNICAL SPECIFICATION
  - 2.3.2 USE OF THE PREAMPLIFIER
- 2.4 THE QCBOX MODEL 5 POWER AMPLIFIER, SWITCHING AND TESTING BOX
  - 2.4.1 TECHNICAL SPECIFICATIONS
3 CLIO INSTALLATION
- 3.1 MINIMUM PC CONFIGURATION
- 3.2 FW-01 DRIVERS INSTALLATION UNDER WINDOWS XP
- 3.3 FW-01 DRIVERS INSTALLATION UNDER WINDOWS VISTA AND 7
- 3.4 SOFTWARE INSTALLATION
- 3.5 THE 'CLIO BOX'
- 3.6 RUNNING CLIO FOR THE FIRST TIME
  - 3.6.1 INITIAL TEST
- 3.7 SYSTEM CALIBRATION
  - 3.7.1 CALIBRATION VALIDATION
- 3.8 CLIO SERIAL NUMBER AND DEMO MODE
- 3.9 TROUBLESHOOTING CLIO INSTALLATION
4 CLIO BASICS
- 4.1 INTRODUCTION
- 4.2 GETTING HELP
- 4.3 CLIO DESKTOP
- 4.4 MAIN TOOLBAR
- 4.5 HARDWARE CONTROLS TOOLBAR
- 4.6 QCBOX & LPT CONTROLS
  - 4.6.1 CONTROLLING THE QCBOX 5 POWER AMPLIFIER, SWITCHING AND MEASURING BOX
- 4.7 CONTROLLING TURNTABLES
  - 4.7.1 TURNTABLES OPTIONS DIALOG
- 4.8 MAIN MENU AND SHORTCUTS
- 4.9 BASIC CONNECTIONS
5 SYSTEM OPERATIONS AND SETTINGS
- 5.1 INTRODUCTION
- 5.2 REGISTERED FILE EXTENSIONS
- 5.3 FILE MENU AND MAIN TOOLBAR BUTTONS
- 5.4 OPTIONS
- 5.5 DESKTOP MANAGEMENT
- 5.6 CALIBRATION
- 5.7 STARTUP OPTIONS AND GLOBAL SETTINGS
  - 5.7.1 SAVING MEASUREMENT SETTINGS
6 COMMON MEASUREMENT INTERFACE
- 6.1 INTRODUCTION
- 6.2 UNDERSTANDING THE DISPLAY IN FRONT OF YOU
- 6.3 BUTTONS AND CHECKBOXES
- 6.4 HOW TO ZOOM
- 6.5 SHORTCUTS AND MOUSE ACTIONS
- 6.6 THE MLS TIME DOMAIN DISPLAY
7 SIGNAL GENERATOR
- 7.1 INTRODUCTION
- 7.2 SINUSOID
- 7.3 TWO SINUSOIDS
- 7.4 MULTITONES
- 7.5 WHITE NOISE
- 7.6 MLS
- 7.7 CHIRPS
- 7.8 PINK NOISE
- 7.9 ALL TONES
- 7.10 SIGNAL FILES
  - 7.10.1 SAVING SIGNAL FILES
8 MULTI-METER
- 8.1 INTRODUCTION
- 8.2 MULTI-METER CONTROL PANEL
  - 8.2.1 TOOLBAR BUTTONS
  - 8.2.2 TOOLBAR DROP DOWN LISTS
- 8.3 USING THE MULTI-METER
  - 8.3.1 THE MINIMIZED STATE
  - 8.3.2 CAPTURING THE GLOBAL REFERENCE LEVEL
- 8.4 THE SOUND LEVEL METER
  - 8.4.1 CAPTURING THE MICROPHONE SENSITIVITY
- 8.5 THE LCR METER
  - 8.5.1 MEASURING AN INDUCTOR
- 8.6 INTERACTION BETWEEN THE MULTI-METER AND FFT
9 FFT, RTA AND “LIVE” TRANSFER FUNCTION
- 9.1 INTRODUCTION
- 9.2 NARROWBAND FFT ANALYZER
  - 9.2.1 TOOLBAR BUTTONS, DROP DOWN LISTS AND DISPLAYS
- 9.3 RTA - OCTAVE BANDS ANALYZER
  - 9.3.1 DEDICATED TOOLBAR FUNCTIONS
- 9.4 FFT SETTINGS DIALOG
- 9.5 FFT AND RTA OPERATION
- 9.6 AVERAGING
- 9.7 TIME DATA DISPLAY (OSCILLOSCOPE)
- 9.8 FFT AND MULTI-METER
- 9.9 FFT AND Leq ANALIZER
- 9.10 “LIVE” TRANSFER FUNCTION ANALYZER
  - 9.10.1 DEDICATED ‘LIVE’ TOOLBAR FUNCTIONS
  - 9.10.2 USING CLIO DURING A LIVE PERFORMANCE
10 MLS & LOG CHIRP
- 10.1 INTRODUCTION
- 10.2 MLS & LOG CHIRP CONTROL PANEL
- 10.3 IMPULSE RESPONSE CONTROL PANEL
  - 10.3.1 TOOLBAR BUTTONS
- 10.4 MEASURING FREQUENCY RESPONSE
- 10.5 OTHER TIME DOMAIN INFORMATION
- 10.6 PROCESSING TOOLS BY EXAMPLE
- 10.7 MLS Vs. LOG CHIRP
- 10.8 RELATED MENUS
11 SINUSOIDAL
- 11.1 INTRODUCTION
- 11.2 SINUSOIDAL CONTROL PANEL
- 11.3 HOW TO MEASURE A SIMULTANEOUS FREQUENCY AND IMPEDANCE RESPONSE OF A LOUDSPEAKER
- 11.4 A BRIEF DESCRIPTION ON SETTINGS EFFECTS
- 11.5 DISTORTION AND SETTINGS
12 WATERFALL , DIRECTIVITY & 3D
- 12.1 INTRODUCTION
- 12.2 WATERFALL, DIRECTIVITY & 3D CONTROL PANEL
  - 12.2.1 COMMON TOOLBAR BUTTONS AND DROP DOWN LISTS
- 12.3 WATERFALL SPECIFIC CONTROLS
  - 12.3.1 WATERFALL SETTINGS
  - 12.3.2 WATERFALL OPERATION
- 12.4 MAKING A CUMULATIVE SPECTRAL DECAY
- 12.5 DIRECTIVITY SPECIFIC CONTROLS
  - 12.5.1 DIRECTIVITY SETTINGS AND OPERATION
- 12.6 MEASURING LOUDSPEAKER SINGLE POLAR DATA (1D MODE)
- 12.7 REPRESENTING SINGLE POLAR DATA
- 12.8 3D SPECIFIC CONTROLS
  - 12.8.1 3D SETTINGS AND OPERATION
- 12.9 MEASURING LOUDSPEAKER SINGLE POLAR DATA (3D MODE)
- 12.10 MEASURING FULL SPHERE LOUDSPEAKER POLAR DATA (3D MODE)
- 12.11 REPRESENTING 3D BALLOON DATA
- 12.12 EXPORT 3D BALLOON DATA
13 MEASURING IMPEDANCE AND T&S PARAMETERS
- 13.1 INTRODUCTION
- 13.2 GENERALS
- 13.3 INTERNAL MODE
- 13.4 I SENSE
- 13.5 CONSTANT VOLTAGE & CONSTANT CURRENT
  - 13.5.1 CONSTANT VOLTAGE
  - 13.5.2 CONSTANT CURRENT
- 13.6 IMPEDANCE: SINUSOIDAL OR MLS
- 13.7 THIELE & SMALL PARAMETERS
14 LINEARITY & DISTORTION
- 14.1 INTRODUCTION
- 14.2 LINEARITY & DISTORTION CONTROL PANEL
  - 14.2.1 TOOLBAR DROP DOWN LIST
  - 14.2.2 LINEARITY & DISTORTION SETTINGS DIALOG
15 ACOUSTICAL PARAMETERS
- 15.1 INTRODUCTION
- 15.2 THE ACOUSTICAL PARAMETERS CONTROL PANEL
  - 15.2.1 TOOLBAR BUTTONS AND DROP DOWN LISTS
  - 15.2.2 INTERACTION WITH THE A.P. CONTROL PANEL
- 15.3 ACOUSTICAL PARAMETERS SETTINGS
- 15.4 THE CALCULATED ACOUSTICAL PARAMETERS
- 15.5 NOTES ABOUT ACOUSTICAL PARAMETERS MEASUREMENT
- 15.6 STI CALCULATION
16 Leq LEVEL ANALYSIS
- 16.1 INTRODUCTION
- 16.2 THE Leq CONTROL PANEL
  - 16.2.1 TOOLBAR BUTTONS AND DROP DOWN LISTS
  - 16.2.2 INTERACTION WITH THE Leq CONTROL PANEL
- 16.3 Leq SETTINGS
17 WOW AND FLUTTER
- 17.1 INTRODUCTION
- 17.2 WOW & FLUTTER CONTROL PANEL
  - 17.2.1 TOOLBAR BUTTON
  - 17.2.2 TOOLBAR DROP DOWN LIST
- 17.3 FEATURES
18 WAVELET ANALYSIS
- 18.1 INTRODUCTION
- 18.2 WAVELET ANALYSIS CONTROL PANEL
  - 18.2.1 COMMON TOOLBAR BUTTONS AND DROP DOWN LISTS
- 18.3 WAVELET ANALYSIS SETTINGS
- 18.4 WAVELET ANALYSIS OPERATION
  - 18.4.1 TRADING BANDWIDTH AND TIME RESOLUTION
  - 18.4.2 NORMALIZED SCALOGRAMS
BIBLIOGRAPHY
NORMS

9.2.1 TOOLBAR BUTTONS, DROP DOWN LISTS AND DISPLAYS

gonew.gif Starts an FFT measurement. Right-clicking on it you open the

associated drop down menu where it is possible to select the Continue switch.

In this mode the measurement is not started from blank but accumulates with

the previously stopped one; see Averaging (9.6) for details.

Stops the current measurement.

Enters the FFT Settings dialog box.

Enables the Time Data display. The second graph that is activated behaves as an

oscilloscope and displays the captured waveform correspondent to the last FFT

analysis.

Enables the Hold function. Depending on the setting entered in the FFT Settings

dialog box, it is possible to hold either the minimum or maximum value per

frequency point.

Moves the equal loudness curve up of 1phon. See also 9.5.

Moves the equal loudness curve down of 1phon. See also 9.5.

data window

Selects a weighting data window among the following:

- Rectangular (no window)

- Hanning

- Hamming

- Blackman

- Bartlett (triangular)

- FlatTop

channel display

Selects the input channel to display among the following:

- Channel A only

- Channel B only

- Channel A&B (both channels displayed in different graphs)

Y scale units

Selects the measurement units among the following:

- dBV

- dBu

- dBRel (with respect to the global reference level; see chapter 8)

- dBSPL (for acoustical measurements)

frequency smoothing

Selects the frequency smoothing in fractions of octave from 1/48 to 1/2 of

octave.

target averages

Inputs the total number of averages. Averaging is controlled by the setting in the

FFT Settings dialog; see Averaging (9.6) for details.

number of averages display

Displays the number of the actual average; this number increases during the

100 9 FFT, RTA AND “LIVE” TRANSFER FUNCTION