Specifications

a new window should pop up, from here it is possible to generate the required
signal for our analysis; choose Pink and select 64k Size from the drop down.
Note that we left Averaging equal to 1 in the FFT settings because we are using a
pseudo-random pink-noise stimulus of same length as the FFT size. Press Play; you
should hear Pink Noise out of the speaker and view the RTA Frequency Response on
screen, with the average level of the signal shown in the Meter box. Now carefully
increase the Output until you reach a realistic listening level, for these speakers say
87 dBSPL. You may then capture your Frequency Response by pressing STOP.
Switch Generator OFF (or simply press ESC).
50 4 ENJOY CLIO POCKET CLIO POCKET - SURVIVAL GUIDE