Specifications

Here we have Frequency and Impulse responses. The Frequency Response is not
Anechoic. In the Time Domain, Zoom both X and Y axes to fit your situation of
impulse and reflections. Eventually temporarily select the Time Domain only Button
for a bigger and more detailed Impulse. Activate Marker A, verify that the
distance of the peak of the Impulse is what you expect, locate the first reflection,
put the Marker A immediately before and click on the Set Stop Window Button .
If you left both Domains visible, as suggested, you should see immediately how the
Frequency Response changes. As a last refinement open the LogChirp Settings
and in the Time Processing settings change the Window from Rectangular to Auto
Half Hann.
Below is what we obtained. The Frequency Response is much smoother then before
with less bass extension and a less steep high-pass behavior. The average level is in
the 87dBSPL range, higher than what was measured using Pink noise. This is
expected and correct.
4 ENJOY CLIO POCKET 45