Specifications

4.2 CONNECTING THE MICROPHONE
If, up to testing T&S Parameters, everything has worked as described, is now time
to connect the microphone. Leave the loudspeaker connected as for impedance.
Using the RCA to RCA 2.7m long microphone cable connect the MIC02 to the CLIO
Input. Check you have set the correct Sensitivity as written in 2.3. Put the
microphone in the Speaker Nearfield as shown in the picture above. Turn the Mic
Power Supply on. Release the In-Out Loop button. This disconnects the CLIO
input from its output, connecting the input only to the RCA socket and therefore to
the microphone. Click on the LogChirp button and then the Measurement
Settings button to invoke the Log Chirp Settings dialog:
Choose dBSPL as unit, set everything else as above confirm with the OK button and
40 4 ENJOY CLIO POCKET CLIO POCKET - SURVIVAL GUIDE