Specifications

Click on the Units label within the Level Meter and select the correct measurement
units for the component under test (Resistance, Capacitance, or Inductance). Then
press the arrow that starts all measurements and you should see a real time
measurement.
We end this chapter by covering T&S Parameters, because these are calculated by
post-processing impedance measurements. One obtained in free air, which means
with the Loudspeaker as is, the second acting a perturbation on the moving part
that can be either an Added Mass or a Known Volume. In the first case the
Resonance Frequency will decrease, in the second increase. Our example will be
with Added Mass as it is usually easier to achieve.
4 ENJOY CLIO POCKET 37