Specifications

4 ENJOY CLIO POCKET
4.1 IMPEDANCE MEASUREMENTS AND T&S PARAMETERS
Once the Calibration has been verified it's time to start performing some
measurements. Loudspeaker Impedance can be measured with CLIO Pocket out of
the box. Connect the RCA to Alligator Impedance Cable to the CLIO output and to
the Loudspeaker terminals (as in the Picture). Verify that the loop button is still
down. Select the LogChirp Analysis. Basically everything should, for now, be left
unchanged since the measure done to validate the calibration. Performing a new
measure with the loudspeaker connected something like the following should
appear on the screen:
34 4 ENJOY CLIO POCKET CLIO POCKET - SURVIVAL GUIDE