Specifications

The result you should obtain is an FFT analysis of the 1kHz sinusoid and its time
representation given by its waveform.
2.6 MICROPHONE SENSITIVITY
As seen, the main and default measurement unit of the instrument is AC voltage.
Before taking measurements in different units, such as dBSPL, you must input the
proper transducer sensitivity. To do this open the Options>Units dialog
To prepare CLIO Pocket to take SPL measurements set your microphone sensitivity
inside this dialog; you may read it from the calibration chart that comes with your
28 2 CLIO POCKET MAP CLIO POCKET - SURVIVAL GUIDE