Operating instructions

22
Answering Machine
34
Setting the number of rings (answering delay)
You can select from 2 to 9 rings and the Tollsaver (tS) setting for
pre−remote access free of charge. The toll−saving, pre−remote ac-
cess feature can be used to check whether new messages have
been received on your answering machine from a distant tele-
phone.
 If new message have been recorded on your answering
machine, your call is taken after 2 rings.
 If no new messages have been recorded, the call is taken
after 5 rings. End the call before the 5th ring. This means
that no charges ensue.
3 sec.  Activate programming mode
2 times  Open the menu
y or z,  Select the setting and confirm it
s Close the menu
For further information on remote access, refer to  Page 36.
Call screening
Call screening of incoming calls is always activated and you hear
the caller via the loudspeaker.
Taking a call being recorded
It is possible to take a call even if the answering machine has al-
ready begun to take it. Recording of the message is stopped in
this case.
è or Ò Take the call
Selecting the answering mode
The answering machine is provided with two, pre−recorded out-
going messages (OGM 1 and OGM 2). After OGM 1 has been
played, the caller can leave a message. OGM 2 is purely an
answer only announcement after which no message can be left.
Both outgoing messages can be replaced by ones of your own.
When the answering machine’s memory is full, OGM 2 is auto-
matically played.
s Change the outgoing message
Service−Hotline Germany: Tel. [phone], cost via German landline at time of going
to print: 14 ct/min., different costs possible via mobile telephone systems