Telephone Operating Instructions TEL5-K
- General Information 1 General Information Please read this operating instruction manual thoroughly. Under no circumstances open the device or complete any repair work yourself. In the case of claims under the terms of guarantee, contact your sales outlet. Disposal In order to dispose of your device, take it to a collection point provided by your local public waste authorities (e.g. recycling centre).
- General Information Installation location Do not place the telephone in the direct vicinity of other electronic equipment, such as microwave ovens or hi-fi systems, since they could cause mutual disturbance. The installation location is a decisive factor to ensure trouble-free operation. Place the telephone on a level, non-slip surface. Normally, the footpads do not leave any marks on the surface where it is located.
- Operating Elements 2 Operating Elements 1 Disconnect button / Receiver hook 2 R button 3 Redial / Dialling pause 4 Connection to base unit 5 Ringer volume control 1 5 2 3 4 Bottom of base unit 6 6 Fixation slots for wall mounting 7 Socket for helix cable to receiver 8 Socket for telephone cable 8 6 7 4
- Starting Up 3 3.1 Starting Up General information ATTENTION! It is essential to read the General Information at the beginning of this manual before starting up. 3.2 Checking the package contents The package contains: a base unit a telephone connection cable an operating manual 3.3 a receiver a helix cable Connecting the receiver After unpacking the telephone, first of all connect the receiver to the base unit.
- Operation 4 4.1 Operation Telephoning The telephone can be used just like any other conventional telephone. Please follow the instructions below: Pick up the receiver and wait for the dialling tone. Dial a number as appropriate. To end a call, replace the receiver in the cradle. Alternatively, press the Disconnect button to end the call being made and immediately connect to a free outside line. 4.2 Taking a call When a call is received, the telephone starts to ring.
- Private Branch Exchanges 5 5.1 Private Branch Exchanges R button on private branch exchanges If the telephone is connected to a private branch exchange (PABX), functions such as transferring calls and automatic call back etc. can be used. The "R" signal button enables access to these functions. Please contact your sales outlet where the PABX was purchased to find out whether your phone can operate properly in the private branch exchange and if other facilities and services are available. 5.
- Declaration of Conformity WE OF AUDIOLINE GmbH HELLERSBERGSTRAßE 2A D-41460 NEUSS Germany DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE PRODUCT MODELL: DESCRIPTION: TEL5-K Telephone Is in conformity with directives: R&TTE Directive (1999/5/EC) COMPLIANCE IS ACHIEVED BY CONFORMITY TO THE FOLLOWING: EN 55022 (1988 +A1 + A2), EN 55024 (1998 +A1 +A2), EN 60950-1(2001), TBR 38 (1998) Autorised by: Signed: Name (printed): Position in company: Date of issue: MANFRED ZINNOW GESCHÄFTSFÜHRER 22.02.
