Contents Voice Evacuation Systems ....................................................................2 Amplifiers .................................................................................................9 Digital Power Amplifiers ........................................................................28 Mixers .....................................................................................................31 Signal Processing Equipment ...........................................................
Voice Evacuation Systems SX-2000 Series Introducing a scalable new system for configuring versatile and highly effective PA applications. The SX-2000 Series is in compliance with the EN 54 Standard, and features new matrixing capabilities, so a single system can have its components distributed in different locations, yet under centralized control.
SX-2100AO Power Source: Usable power supply unit: VX-200PS/ 24V DC (operational range: 20V – 40V DC)/Two power inputs construction enables dual- redundant power supply. Current Consumption: 1.7A or less (maximum value in the power operating range)/ 1.2A or less (when operated on 24V DC) Note: But except current consumption of the external equipment of which power is supplied from the unit.
SX-2000 Series Modules SX-200RM Remote Microphone Interface Module D-936R Audio Input: 2 inputs, 0dB*, RJ45 Connector Audio Input Characteristic: Sampling Frequency: 48kHz A/D Converter: 24 bit Power Feed: Max. 1A per connector Level Control: Audio input (0 to +12dB) Finish: Panel: Pre-coated steel plate, black, 30% gloss Dimensions: 1.4 (W) x 4.7 (H) x 7 (D) in Weight: 0.
RM-200SA Power Source: 24V DC (operating range: 15 – 40V DC, supplied from the SX-2000AI or SX-2100AI audio input unit) or DC input power supple connector (when the optional AD-246 power supply unit used)/Usable DC power supply plug: 0.2in outer diameter, 0.08in inner diameter 0.4in long, and non-polarity type Current Consumption: 240mA or less Audio Output: 0dB*, 600Ω, balanced External Microphone Input: -40dB*, 2.2kΩ, unbalanced, mini jack, for electret condenser microphone (phantom power supply.
VM-3000 Series The VM-3000 Series (UL2572 Pending) is an Emergency Voice Paging System ideal for small and medium-sized applications. It incorporates such emergency functions as continuous speaker line monitoring and a built-in voice alarm. This easy-to-install system also offers PA broadcasting, paging and BGM functions that ensure consistently high intelligibility.
VM-3000 Series VM-3240VA (240W) Voice Alarm System Amplifier Power Source: 230V AC, 50/60Hz Power Consumption: 600W (at rated output), 260W Rated Output: 240W Frequency Response: 50Hz – 20kHz, ±3dB (at 1/3 rated output) Distortion: 0.
VM-3000 Series Microphones and Optional Accessories RM-300MF Power Source: 24V DC (operating range; 15 – 40V DC, supplied from the VM-3000 system) Current Consumption: 120mA (RM-300MF), 660mA (with 3 RM-320F connected) Frequency Response: 200Hz – 15kHz Distortion: 1% or less S/N Ratio: 55dB or more Microphone: Unidirectional dynamic microphone with talk key, compressor (on/off switchable) Volume Control: Microphone volume control, Buzzer volume control Connection Cable: Main line: shielded CPEV cable (each
Amplifiers 9000 Series Modular Digital Matrix Amplifiers Digital Matrix Power Amplifiers P-9060DH (60W) P-9120DH (120W) Power Amplifier TOA’s P-9000 Series Power Amplifiers provide 2-Channel power amplifiers to provide system expansion of the 70.7 volt amplifier outputs for the 9000 Series Mixer/Amplifiers using the T001T output modules. This maintains the systems cool 9000 Series style and look.
MAIN FEATURES A-9060SM2, A-9120SM2, A-9240SHM2, A-9060DHM2, A-9120DHM2 MODULAR DIGITAL MATRIX MIXER AND MIXER/AMPLIFIERS • Multiple input priority modes sets priority order when multiple inputs with the same priority level and output assignment are broadcast • First-In-First-Out (FIFO): input that occurs first is broadcast • Last-In-Last-Out (LIFO): the most recent input is broadcast • MIX: all inputs are simultaneously mixed and broadcast • Voice Operated (VOX) paging activation with adjustable threshold/
Power Source Power Consumption A-9060DHM2 MIXER/AMP A-9120DHM2 MIXER/AMP A-9060SM2 MIXER/AMP 150 W 120 V AC, 60 Hz 250 W 100 W Max. 8 channels, modular construction (modules optional) Power amplifier input 1, 2: 0 dBV*1, 10k Ω, RCA pin jack Audio Input Preamplifier output 1, 2: 0dBV, 300Ω, unbalanced, RCA pin jack Audio Output Preamplifier output 1: 0dBV, 300Ω, unbalanced, RCA pin jack; Preamplifier output 2: 0 dBV, 600Ω, balanced, removable terminal block (3 pins) Speaker output 1, 2: 60W, 70.
Power Source Power Consumption Audio Input A-9120SM2 MIXER/AMP A-9240SHM2 MIXER/AMP 150 W 120 V AC, 60 Hz 250 W Max. 8 channels, modular construction (modules optional) Power amplifier input: 0 dB*1, 10 kΩ, RCA pin jack Preamplifier output 1: 0 dB*1, 300 Ω, unbalanced, RCA pin jack Preamplifier output 2: 0 dB*1, 600 Ω, unbalanced, removable terminal block (3 pins) Audio Output Module Slot Speaker output: Removable terminal block (7 pins); Direct: 120 W, 4Ω.
9000 Series Modules AN-001T Ambient Noise Control Module MAIN FEATURES • • • • • • Automatically adjusts output gain to compensate for changes in ambient noise level Each input can be assigned to control a specific output Two inputs with +24VDC phantom power for condenser mics 14 preset gain ratios Accessory sensing microphone available, model AN-9001 Maximum two per chassis Power Source:+24V DC, -24V DC, +6V DC Current Consumption: 20mA (at +24V DC), 20mA (at -24V DC), 60mA (at +6V DC) Input: Sensor in
T-001T Dual Line Output Expansion Module with DSP MAIN FEATURES • Two balanced line outputs • Digital signal processing (10-Band Parametric EQ, Bass/ Treble, Loudness, High and Low Pass Filters, Compressor, TOA speaker EQ presets) • Removable terminal block • Maximum three per chassis Power Source: +24V DC, -24V DC, +6V DC Current Consumption: 35mA (at +24V DC), 35mA (at -24V DC), 60mA (at +6V DC) Output: 2 channels, max.
9000 Series Optional Accessories ZM-9001 Remote Panel MAIN FEATURES • • • • • • Six buttons to activate preset selection or volume up/down Wiring: only one pair to chassis remote volume terminals Max. loop resistance: 100 ohms (3000 ft. 22AWG) Fits one gang electrical box Maximum two ZM-9001/ZM-9002 per chassis Uses built in 9000M2 REMT VOL port Applicable Cable: Single conductor shielded cable Line Resistance: 50Ω or less (per line) Terminal: M3 screw terminal, distance between barriers: 7.
ZM-9012 Remote Panel MAIN FEATURES Assignable Volume Controller • Fits standard single-gang electrical box • Rotary encoder can be assigned to control any input or output volume • Multiple input or outputs may be “ganged” for master volume control • Multi-segment LED indicator provides visual volume level status • Supplied matching decor plate • Removable terminal block • Requires RC-001T Power Source: 24V DC (supplied from RC-001T) Current Consumption: 50mA or less Terminal: Removable terminal block (10
Q-RM9012 MAIN FEATURES Remote Microphone • High-sensitivity electret-condenser gooseneck mic for clear voice • 12 zone select buttons, All Call, Clear • 12 Contact Outs corresponding to buttons (RJ-45 connector for use with shielded Cat5 wiring) • Connects to C-IN on 9000M2 (mainframe & equipped with C-001T) • Supplied with AD-246 AC Adapter Q-SS9012 MAIN FEATURES Speaker Selector Power Source: 24 V DC from AC adaptor AD-246 or equivalent Power Consumption: 80mA or less Audio Output: 0 dB (*1), 600 O
M-900MK2 MAIN FEATURES (UL version) 8-Channel Mixer Preamplifier TOA’s M-900MK2 Mixer Preamplifier controls and mixes up to eight independent input signals and delivers up to +20 dBm of output power. Optional plug in modules are available for use with mixer preamplifier to provide versatility for a wide range of operating applications.
P-906MK2 (60W) P-912MK2 (120W) (UL version) Power Amplifier P-924MK2 (240W) (UL version) Power Amplifier Type Power Requirement Power Consumption Output Power TOA’s P-900MK2 Series Power Amplifier delivers up to 60/120/240 watts of output power. The power amplifier has an input port to accept one plug-in module.
A-700 Series Mixer Power Amplifiers A-706 (60W) A-712 (120W) A-724 (240W) Equipped with 6 LINE/MIC selectable inputs, 2 LINE inputs and 1 MODULE input, the A-700 Series PA Amplifier is designed to suit PA system applications such as genreal announcements, BGM and houses of worship, large meeting rooms and factories.
BG 200 Series PA Amplifiers BG-220 (20W) BG-235 (35W) Mixer Amplifier The BG-200 Series is a 20/35 W three-input mixer amplifier for background music and general announcement. It is suited for use in bars, retail stores, and banquet rooms, and is equipped with the MOH OUT that permits 2-channel broadcast when used in conjunction with the optional booster amplifier BA-235 (35 W) or BA-260 (60 W).
BG-2000 Series Mixer Power Amplifiers BG-2035 (35W) BG-2060 (60W) BG-2120 (120W) TOA’s BG-2000 Series Mixer/Amplifiers is a 5-input mixer amplifier for background music and general announcement. It is suited for use in bars, retail stores, and banquet rooms. It is equipped with the MOH OUT that permits 2-channel broadcast when used in conjunction with the optional booster amplifier BA-235 (35 W) or BA-260 (60 W).
900 Series Modules - Microphone Input Modules M-01 Series (M-01F/M/P/S) Microphone Input Modules • For balanced, low impedance microphone • High and low cut filters for tone control • Phantom power for condenser-type microphones • Connectors: female XLR (M-01F), male XLR (M-01M), 1/4” phone jack (M-01P), removable terminal block (M-01S) M-11S Microphone Input with Mute-Receive • For balanced, low impedance microphone • High and low cut filters for tone control • Phantom power for condenser-type microphones
U-03 Series (U-03R/S) Unbalanced Line Input with High/Low Cut Filters • For unbalanced, line level sources such as tuners, cassette decks, CD players, computer sound cards, jukeboxes, mixers and satellite receivers • Use for adjacent sources (less than 15ft from the host unit) • High and low cut filters for tone control • Connectors: dual RCA jack w/ passive summing (U-03R), removable terminal block (U-03S) U-11 Series (U-11R/S) Unbalanced Line Input with Mute-Receive • For unbalanced, line level sources s
S-01S 1 kHz Sine Wave Test Tone • Generates 1 kHz sine wave tone via switch-closure.
A-2000 Series Mixer Power Amplifiers A-2240 (240W) The A-2240 (240W) Mixer Power Amplifier is suitable for commercial audio systems in schools, offices, restaurants, shops, factories, houses of worship, and large meeting rooms. It is engineered for high porformance with wide frequency response, low noise and distortion, and excellent output regulation, and is wquipped with balanced mic. inputs for better isolation from external noise, compared to unbalanced inputs.
Paging Accessories Q-RM9012PS Remote Microphone MAIN FEATURES • High-sensitivity electret-condenser gooseneck mic for clear voice • 12 zone select buttons, All Call, Clear • 12 Contact Outs corresponding to buttons (RJ-45 connector for use with shielded Cat5 wiring) • Connects to C-IN on 9000M2 (mainframe & equipped with C-001T) • Supplied with AD-246 AC Adapter Power Source: 24 V DC from AC adaptor AD-246 or equivalent Power Consumption: 80mA or less Audio Output: 0 dB (*1), 600 Ohms, transformer balance
Digital Power Amplifiers DA Series - Multi-Channel Amplifiers TOA’s DA Series multi-channel power amplifiers offer a wider choice of power ratings, advanced digital Class D amplifications circuitry, and a highly efficient AC mains to output power ratio, for the complete technological superiority it takes to support long-term installation applications.
DA-250F Power Source Amplification System Power Consumption Input Rated Output DA-250FH DA-250D DA-250DH DA-500F-HL 120 V AC, 50/60 Hz Class D 200 W (based on 120 W (based on 200 W (based on 120 W (based on 480 W (based on UL/CSA standards) UL/CSA standards) UL/CSA standards) UL/CSA standards) UL/CSA standards), 1300 W (rated output 650 W (rated output 4 1200 W (rated output 580 W (rated output 2600 W 4 Ω × 4); 850 W Ω × 2); 420 W 70 V line, 19.6 Ω × 4) 70 V line, 19.
Optional Accessory - DA Series MT-251H Matching Transformer • For DA-250DH, DA-250FH, and DA-500F-HL Capacity: 0W – 250W Primary Side: 100V line, 70V line Secondary Side: 100V line, 70V line, 50V line, 35V line Frequency Response: 30 - 18,000Hz (+0dB, -3dB) Connection Terminal: M3 screw terminal, distance between barriers: 6.6mm Dimensions: 4.3 (W) × 3.1 (H) × 4.8 (D)in Weight: 6.2lbs AV-20D Micro Amplifier AV-20D Micro Amplifier The AV-20D introduces a new standard in small amps for plenum use.
Mixers D-2000 Series Digital Mixing Systems D-2008SP Digital Mixing Processor Unit TOA’s D-2000 Series integrates high-performance mixing, matrixing and processing functions to meet a wide scope of sound reinforcement applications. Expandable to a maximum system configuration of 128 combined inputs and/or outputs, the D-2000 Series includes various modules and peripherals that can be combined to create the best possible sound in small to medium sized venues.
Q-D-2012C The Q-D-2012C is a 6U rack mountable Remote Console Unit designed for exclusive use with the D-2008SP Digital Mixing Processor Unit. Assigned to any desired channels inside the D-2008SP by the dedicated software, the Q-D-2012C’s 12 motorized faders and 8 rotary encoders can remotely adjust their volumes. Desired preset memories can be recalled using 8 function keys. It is equipped with 1 channel line input (stereo), which allows the audio signal to be transmitted to the D-2008SP via monitor bus.
D-901 Digital Mixer D-901 Digital Mixer TOA’s D-901 is a 19-type rack-mounted (3U high) digital mixer configured with 12 inputs, 8 buses, and 8 outputs. It features signal processing functions necessary for sound systems such as feedback suppression and auto-mixing. Modular construction permits flexible configuration of inputs and outputs, from 2-IN/4-OUT to 12-IN/8-OUT systems. All functional parameters can be set at the unit.
D-901/DP-K1/D-2000 Series Modules MAIN FEATURES D-921F • Two balanced mic or line level inputs Mic/Line Input Module (24 bits Monaural Type) • • • • Dynamic Range: 100 dB (IHF-A weighted) or more (+4dB* input) THD: 0.05% or less (+4dB* input) Finish: Panel; Pre-coated steel plate, black , 30% gloss Dimensions: 1.4 (W) × 4.7 (H) × 7 (D)in Weight: 150g 24-bit A/D converters Adjustable input gain Phantom power XLR-F connectors * 0dB = 0.775V Input: 2 channels, Mic/Line changeable/ Mic; -50/-36dB*, 4.
D-923AE MAIN FEATURES Digital Input Module AES/EBU Digital Input Module • Two digital inputs • AES/EBU format • XLR-F connector • Maximum distance: 328ft (100m) Input: 2 channels, 2.0 – 7.0V (p-p), 110Ω, XLR-3-31 or equivalent Applicable Format: AES/EBU (2 channel multiplexed) Sampling Frequency: 32 – 48kHz Finish: Panel; Pre-coated steel plate, black, 30% gloss Dimensions: 1.4 (W) × 4.
D-971R Line Output Module MAIN FEATURES Output: 4 channels (2 outputs for each channel), -10dB*, adaptable load of over 600Ω, RCA pin jack D/A Converter: 24 bit Sampling Frequency: 48kHz Frequency Response: 20 – 20,000 Hz, ±1dB Dynamic range: Over 100dB (IHF-A weighted) THD: Under 0.05% Finish: Panel; Pre-coated steel plate, black, 30% gloss Dimensions: 1.4 (W) × 4.7 (H) × 7 (D)in Weight: 150g • Four stereo or mono sum line level outputs • RCA pin jack connectors * 0dB = 0.
Front Panel Section Input Level Indicator: 3-point LED, 12 channels (each monaural input channel, stereo 1L, 1R, 2L, 2R) Output Level Indicator: 8-point LED, 4 channels (each output channel) Auto Resonance Control (ARC) Measurement: ARC measuring start switch × 1, ON/OFF LED × 1 Feedback Suppressor (FBS) Function: ON/OFF switch × 8, ON/OFF LED × 8 Low Cut: ON/OFF switch × 8, ON/OFF LED × 8 Stereo Summing: ON/OFF switch × 2, ON/OFF LED × 2 Tone Control: BASS, MID, TREBLE/Settable on the function setting pane
M-633D Digital Stereo Mixer TOA’s M-633D Digital Stereo Mixer is equipped with 12 input channels (6 monaural inputs and 3 stereo inputs), and 6 output channels (2 monaural outputs, 1 stereo output, and 1 stereo recording output). This unit performs advanced acoustic compensation by means of automatic processing without the use of an acoustic measuring instrument.
Signal Processing Equipment Integrated DSP and Control Systems DP-K1 Digital Audio Processor The DP-K1 is a 3U rack mountable Digital Audio Processor. It features Automatic Resonance Control (ARC) that automatically generates an optimum filter curve to improve sound clarity after measuring the acoustic characteristics in architectural space. It permits flexible configuration of inputs and outputs, from 2-IN/4-OUT to 8-IN/8-OUT using the optional modules.
Equalizers E-1231 1-Channel 1/3 Octave Graphic Equalizer The E-1231 is a single channel, 1/3 octave active graphic equalizer designed to allow clean, accurate audio equalization for stage, studio, or commercial applications. MAIN FEATURES 28-BAND GRAPHIC EQUALIZER • 28 filters on 1/3 octave center frequencies from 31.
Digital Speaker Processor DP-SP3 The DP-SP3 Digital Speaker Processor enables you to enhance your sound system easily and inexpensively. Designed specifically to work with speakers, the processor taps into characteristics of individual speakers and draws out their best possible performance, to help realize richer, more expressive sound in a variety of venues.
Network Related Systems NX-100 - Network Audio Adapters NEED TO GET AUDIO TO A REMOTE SITE A MILE AWAY? How about multiple locations across the country, or on another continent? Your customer already has a data network infrastructure. The world’s largest communications network, the Internet, is ready and waiting. Why not use them for commercial audio distribution? Corporate messaging, wide area paging – the possibilities are limitless.
Network Audio Adapters NX-100 Network Audio Adapter NX-100S Network Audio Adapter Power Source: 24V DC (removable terminal block (3 pins)) or AC adapter AD-246 (optional) or the equivalent Current Consumption: 200mA (DC operation) Audio Input: 1 channel (transformer-isolated), -58dB* to 0dB*, balanced (MIC/LINE changeable, volume adjustable with volume control), 2kΩ, removable terminal block (3 pins) Audio Output: 1 channel (transformer-isolated), balanced, 600Ω, removable terminal block (3 pins) Freque
Rack Mount Equipment and Others Program Timer TT-104B MAIN FEATURES Program Timer The TT-104B is a program timer that comes with 4 outputs and controls 4 different broadcasts. With use of an optional rack-mounting bracket, it can be mounted in an EIA Standard equipment (occupying 1 unit size). TT-104B PROGRAM TIMER • For timed control of external equipment and events. • Four independent outputs with thirty programmable steps per output • Outputs feature 0.5 A (@ 24 VDC) five second dry contact closures.
AM/FM Tuner DT-930 Synthesized AM/FM Tuner TOA’s DT-930 Radio Tuner is an AM/FM Tuner designed for use as a commercial background music source, capable of receiving FM stereo broadcast and storing a total of 40 FM and AM stations. With the use of an optional rack mounting bracket, it can be mounted in an EIA Standard equipment rack (1 unit size).
Commercial Sound Speakers Plane Wave Speakers The TOA Plane Wave Speaker is a flat speaker system equipped with a plane wave unit consisting of a diaphragm, buffer, magnet, and case, enabling radiation of sound in narrow horizontal and vertical directivity patterns, delivering clear audio to a limited target area with minimal attenuation. The metal parts of the plane wave unit and the entire speaker cabinet are made of stainless steel, making the speaker rust-resistant.
Ceiling Speakers Flush Mount Type Ceiling Speaker The PC-580RU & PC-580RVU are designed to fill the need for a high-performance / low-cost ceiling speaker for paging and notification applications, especially where retrofit of speakers in large facilities, dictate that common speaker template is used, eliminating the need for adapting existing ceiling cutouts.
Box Speakers Wall Mount Box Speakers BS-680FC (6W) TOA’s BS-680FC speakers have a strong, all-metal body, and are ideally suited for emergency broadcasting (voice alarm system) applications. The 6” (16cm) double cone speaker unit ensures high-quality sound. They can be quickly and easily installed in either a horizontal or a vertical orientation. Either concealed in-wall wiring or exposed wiring can be used for speaker cable connection.
BS-1034 (10W) BS-1034S (10W) The BS-1034 & BS-1034S are wall-mount, low profile, speakers matched with a supplied slidein and locking meeting plate, for easy installation. The 10W rated input BS-1034/BS-1034S combine a low-frequency 5” (12cm) cone-type speaker and a high-frequency balanced dometype speaker. An M4 screw terminal input connector allows easy connections. The speakers are driven on a high-impedance (100V or 70V) line, with rated inputs. A low profile blends in well with the room décor.
Horn Speakers Combination Type Reflex Horn Speakers SC Series TOA SC Series Paging Horn Speakers provide intelligible voice paging and tone signaling for indoor and outdoor sound system applications. Fully weather-resistant (Ip-65 rated) for reliable operation in demanding environmental conditions, SC Series models are available with a choice of power ratings from 15 W to 30 W and a built-in 25 V / 70.7 V transformer with external screwdriver-adjustable power taps.
SC-610 SC-610T SC-615 SC-615T SC-630 SC-630T SC-651 Rated Input 10W, 8Ω 10W, w/ transformer 15 W (Mobile Mount use: 10 W) 15 W 30 W (Mobile Mount use: 15 W) 30 W 50 W (Mobile Mount use: 30 W) Line Voltage -- -- -- 70 V line or 25 V Line -- 70 V line or 25 V Line -- 8Ω 70.7V line: 10W (500 Ω), 5W (1Ω), 2.5W (2 Ω) 25V line: 10W (63 Ω), 5W (130 Ω), 1.3W (500 Ω), .6W (1kΩ), .3W (2kΩ) 8Ω 70V line: 15W (330Ω), 7.5W (650Ω), 3.8W (1.3Ω) 25V line: 15W (42Ω), 7.5W (83Ω), 1.
Wide Range Horn Speakers (Weatherproof) TOA CS Series Wide-Range Paging Speakers are ideal for indoor and outdoor commercial sound system applications for voice paging, background music and tone signaling distribution. Compared to traditional metal paging horns, CS Series speakers offer wider frequency range and superior sound quality. Each includes a built-in 70.7V/100 V transformer with screwdriver-adjustable power taps.
Interior Design Speakers Pendant Speakers PE-304 (30W) Q-PE-304BK Projection Speaker TOA’s PE (Pendant) and PJ (Projection) Series Speakers are ceiling/wall speakers designed for ceiling suspension installations. Considered in architectural design, these speakers can blend in with lighting equipment. A directly-attached 16.4ft (5m) (PE only) cable allows the speaker to be suspended from high ceilings.
Others Impedance Meter ZM-104A Impedance Meter The ZM-104A Impedance Meter can measure the impedance of speaker lines Power Source easily in the same manner Current Consumption as a circuit tester meaReading sures resistance.
EASE Focus Generic Aiming and Acoustic Modeling Software EASE Focus is a software that allows the modeling of acoustic sources, in particular line arrays, in two dimensions. It considers the direct field created by the complex addition of the sound contributions of the individual loudspeakers or array elements. Based on an intuitive and consistent interface, the design of EASE Focus is targeted at the end user, but also at the R&D engineer.
Pro-Sound Speakers Line Array Speaker Systems * SYNC-Drive(TM) is the technology of TOA's wave-front control. Type A Series SR-A12L/SR-A12LWP TOA’s Type A Full Size, Two-Way Line Array Speakers feature a linear wave front control technology that creates sound fields with uniform sound pressure and high sound clarity. The SR-A12L and SR-A12S are two-way line array speakers ideal for long (SR-A12L) or short (SRA12S) distance sound transmission.
Type C Series SR-C8L/SR-C8LWP TOA’s Type C Mid-Size, Two-Way Line Array Speakers feature wave front control technology which creates a sound field with high sound clarity and uniform sound pressure level. Recommended digital processor is the D-901 or D-2008 (optional). They can be converted to operate in bi-amplifier or full-range modes with simple internal adjustment.
Steerable Line Array Speaker System SR-D8-M/SR-D8-S Steerable Line Array Speaker TOA brought together it s proprietary line array technology and digital signal processing (DSP) technology in developing the SR-D8 Steerable Line Array Speaker. As well as processing both analog and digital audio input, this innovative speaker harnesses 8 built-in digital amplifiers to project sound waves to targeted areas with greater precision than is possible with conventional speakers.
Optional Accessory SR-D8FB Finish: Steel plate, white, paint Weight: 120g (including accessories) Accessory: Bracket fixing screw (M8 upset head) x 2, Nut (M8) x 1 SR-D8HB Product Composition: Hoisting bracket x 1, Eyebolt x 1 Finish: Steel plate, white, paint Weight: 5.29lbs (including accessories) Accessory: Speaker mounting screw (M6 upset head) x 8 SR-D8EP Number of Speaker to be Joined: Max.
Type S Series SR-S4L/SR-S4LWP Line Array Speaker System TOA’s Type S Slim Type Two-Way Line Array Speakers have a low visual profile that fits into demanding settings. They are ideal for venues with highly reflective interior surfaces such as conference centers, houses of worship and railway stations. The slim compact design is also ideal for speech applications.
Type H Series SR-H2L Line Array Speaker System TOA’s Type H Ultra-Slim Line Array Speakers form a linear sound source vertically in close proximity. They can be used in 8Ω or arranging individual speaker units vertically for high-impedance applications with the installation of the optional MTS0301 Matching Transformer.
Compact Array Speakers HX-5B/HX-5B-WP Compact Array Speaker System TOA’s HX-5 Series are 2-way compact speakers that HX-5W/HX-5W-WP permit both constant directivity control over a wide Compact Array Speaker System frequency range and changes in that directivity. It is ideal for reproducing clear sound in spaces with long reverberation times or high background noise. The HX-5 is designed for indoor (HX-5B/W) and outdoor (HX-5B-WP/W-WP) use.
H Series Speakers H-1 EX 2-Way Flush Mount Speaker System The H SERIES INTERIOR DESIGN SPEAKERS are the latest example of TOA’s modern, innovative approach to commercial speaker design. The unique, stylish appearance and superb sound quality of the three models, the H-1, H-2 and H-2WP, provide a welcome alternative to conventional wall-and ceiling-mount speakers. The H-3 Wide Dispersion model offers 140° of horizontal coverage and mounts with a standard two-gang electrical box.
H-3 EX/H-3WP EX 2-Way Wall Mount Speaker System MAIN FEATURES WIDE-DISPERSION WALL-MOUNT SPEAKER • Surface mount speaker • Special appearance blends well with modern architecture for background/foreground music and paging systems • Wide coverage area: 140° horizontal dispersion • Weather-resistant version available, model H-3WP • Minimum reflection design reduces sound wave reflections typical of conventional bracket-mounted “box” type speaker • Two-way, sealed enclosure • Dual 4” woofers with neodymium
H-1 EX H-2 EX H-2WP EX Enclosure Type Power Handling 90 W (continuous program/4 Ω) 30 W (continuous pink noise/4 Ω) 120 W (continuous program/4 Ω), 40 W (continuous pink noise/4 Ω) Rated Input Rated Impedance Output Sound Pressure Level H-3WP EX 150 W (Continuous program/8 Ω) 50 W (Continuous pink noise/8 Ω) 12 W (16 Ω, high impedance) 30 W (16 Ω, high impedance) 4 Ω, 16 Ω 100 V line: 830 Ω (12 W), 1.7 kΩ (6 W), 3.3 kΩ (3 W) 70 V line: 420 Ω (12 W), 830 Ω (6 W), 1.7 kΩ (3 W), 3.3 kΩ (1.
F Series Speakers Wide-Dispersion Speakers F-1000BT/1000WT F-1000BTWP/1000WTWP 2-Way Wide-Dispersion Speaker System TOA’s F-1000/F-1300/F-2000 Series speakers are compact two-way speakers designed for high efficiency, wide range, and high power input handling capability. These speakers can be installed in a manner ideal for any location and intended application.
F-1300BT/1300WT F-1300BTWP/1300WTWP 2-Way Wide-Dispersion Speaker System F-1300BT Enclosure Rated Input F-1300WT F-1300BTWP* F-1300WTWP* Bass-reflex type 30 W 100 V line: 330 Ω (30 W), 1 kΩ (10 W), 3.3 kΩ (3 W), 10 kΩ (1 W) 70 V line: 170 Ω (30 W), 330 Ω (15 W), 1 kΩ (5 W), 3.3 kΩ (1.5 W), 10 kΩ (0.
F-2000BT/2000WT F-2000BTWP/2000WTWP 2-Way Wide-Dispersion Speaker System With Horn Adapter Without Horn Adapter F-2000BT F-2000WT Enclosure F-2000BTWP* F-2000WTWP* Bass-reflex type Rated Input 60 W 100 V line: 170 Ω (60 W), 330 Ω (30 W), 670 Ω (15 W), 3.3 kΩ (3 W) 70 V line: 83 Ω (60 W), 170 Ω (30 W), 330 Ω (15 W), 670 Ω (7.5 W), 3.3 kΩ (1.
Wide-Dispersion Ceiling Speakers TOA’s F Series Ceiling Speakers are ideal for music and paging applications such as audio conferencing, business music or retail sound systems. These speakers feature smooth off-axis coverage, versatile range of models, and ease of installation. For premium wide-dispersion performance, TOA’s F-122CU is a 5” full-range processed ceiling speaker, UL Listed for fire protective, general purpose signaling and air-handing spaces.
Plenum Ceiling Speakers F-2852C 2 Speakers in a box with 2 tile Bridges F-2852CU2 (UL1480 / 2043 rated) Enclosure Rated Input 60 W (High Impedance ) Non-Plenum Ceiling Speakers F-2322C F-2352C F-122CU F-2352SC F-1522SC F-2322CU2 F-2352CU2 F-122CU2 N/A N/A Bass reflex type 30 W (High Impedance) -6 W (High Impedance) Power Handling Capacity Continuous pink noise: 90W (8Ω), 60W (16Ω) Continuous program: 180W (8Ω), 120W (16Ω) Continuous pink noise: 60W (8Ω), 30W (16Ω) Continuous program: 120W (8
Optional Accessories HY-BC1 HY-TR1 HY-TB1 Ceiling Hole Diameter: 200 – 300mm Finish: Surface-treated steel plate, white, paint Weight: 500g Finish: Steel plate, plating Weight: 500g (for set of 2 bars) Accessory: Mounting screw × 4 HY-AH1 HY-RR1 HY-RR2 Finish: Steel plate, plating Weight: 700g Accessory: Paper pattern × 1 Ceiling Hole Diameter: 135mm Finish: Surface-treated steel plate Weight: 80g Ceiling Hole Diameter: 200mm Finish: Surface-treated steel plate Weight: 280g Back Can Finish: Surf
HS Series Speakers HS-1200BT/HS-1200WT HS-1500BT/HS-1500WT The HS Series is a 2-way speaker system that features a large diameter woofer with a co-axial tweeter array. It can be installed and used in many different applications with combined use of the supplied accessories and/or the optional mounting brackets.
Conference Systems TS-900/TS-800 Series Systems TS-900/TS-800 Series Infrared Wireless Conference Systems TOA’s TS-800/900 Series Infrared Conference Systems are ideal for conferences and meetings in corporate, educational and hotel applications. This system provides secure wireless communications for conferences and boardrooms and the cordless operation removes all cables from view.
The TS-901 and TS-801 are Chairman units, while TOA’s TS-902 and TS-802 are Delegate units of the Infrared Conference system. Since the system is cordless, it can be easily installed and removed. The Chairman unit features a priority speech key which allows it to take precedence over the TS-902 Delegate Units (optional) when speaking. It can be operated on either the AD-0910 AC adapter (optional) or the BP-900 Lithium-ion Battery (optional). It is equipped with a remaining battery indicator.
TS-800/TS-900 Series System Image 75
TS-905 TS-907 MAIN FEATURES • Installs in ceiling or wall • TS-905: Up to 16 ft. ceiling height • TS-907: 16 to 23 ft.
BC-900 Battery Charger The BC-900UL is a dedicated battery charger for the BP-900UL (optional) used in the Chairman units and Delegate units. It permits up to 8 batteries to be simultaneously charged within up to 5 hours. MAIN FEATURE • Charges up to eight BP-900UL Lithium-ion Batteries BP-900 Rechargeable Lithium-Ion Battery AD-0910 AC Adapter Power Source: 100 – 240 V AC, 50/60 Hz (supplied from AC adapter (accessory)) Current Consumption: Max. 5 A Charging Time: Approx.
TS-770 Series Conference Systems The TS-770 Series Conference System is ideal for conferences and meetings in government, corporate, educational and hotel applications. The TS-770 system provides communications for conferences and boardrooms. The easy to use TS-770 Series is comprised of the TS-770 Central Unit supporting up to 70 chairperson/delegate stations. TOA’s TS-770 Series Conference System is backed with a five year product warranty.
TS-775 MAIN FEATURES Remote Delegate Interface Unit • Audio Input/Output for local PC connection to a remote PC participant • PC to PC call connection over network uses third party software/service not provided by TOA • RJ-11 connection provided to connect with handset connector on telephone base unit for calls connected to a remote telephone participant • Speech Mode (Selectable) • Auto: VOX (Voice Activated Switch) • Manual: Talk Key On-Off switching function • Contact closure output when microphone is
System Software for TS-800/900 MAIN FEATURES • Configure, control, manage and personalize/customize each conference • Assign unit ID’s and member names • Conference equipment set-up and configuration • Conference Main Display controls and monitors meeting functions, including;start/end conference, voting and speech timer, monitor attendance and unit status (connection status, speaking, chairman priority, battery alarm) • Record and access the conference speech and voting for later reference/review • Confer
Wireless Microphone Systems UHF Wireless Systems and Optional Accessories WM-5270 UHF Hand-held (Vocal) Wireless Microphone MAIN FEATURES VOCAL HANDHELD MICROPHONE • Unidirectional, cardioid pattern • Single AA battery, 9V (ten hours) • Low battery indication • Built-in antenna • ON/OFF switch with tab prevents microphone from rolling • Low handling noise • Mic clip and carrying pouch included • Compatible with receiver models: WT-5800, WT-5805, WT-5810, WT-4800, WT-5100 Microphone Element: Dynamic micro
YP-M5300 Unidirectional Lavalier Microphone Type: Electret condense type Directivity: Unidirectional Sensitivity: -63dB ±3dB (0dB = 1V/0.1 Pa, 1kHz) Frequency Response: 100Hz – 12kHz Maximum Input Level: 120dB SPL Cord Length: 4.3ft Connector: 3.5mm mini plug Finish: Dark black Weight: 20g (cable included) Type: Electret condense type Directivity: Unidirectional Sensitivity: -66dB ±3dB (0dB = 1V/0.1 Pa, 1kHz) Maximum Input Level: 120dB SPL Cord Length: 4.3ft Connector: 3.
WT-5100 MAIN FEATURES UHF Portable Receiver •• Portable UHF tuner suitable for assisted listening Rechargeable with optional chargers & batteries • Tunable to any of 16 UHF channels • Compatible with 5000 Series transmitters • 1/8” headphone output for optional earphones WTU-4800 MAIN FEATURES UHF Wireless Tuner Unit UHF Wireless Tuner/Receiver Module • Wireless receiver module for WT-4820 Modular Dual Channel Wireless Receiver Microphone • Employs a compressor-expander system noise reduction circuit
WT-5800 MAIN FEATURES UHF Wireless Tuner True Diversity Receiver • Compact half-rack size • Scanner function • Transmitter battery status display • True diversity reception • Two detachable antennas • 64 selectable channels WT-5805 MAIN FEATURES UHF Wireless Tuner Space Diversity Receiver • Compact half-rack size • Scanner function • Transmitter battery status display • TOA Space diversity reception • Antenna loop outputs not included • 64 selectable channels WT-5810 MAIN FEATURES UHF Wireless Tun
BC-5000-2PS Battery Charger BC-5000-6PS Battery Charger Power Source: 12 V DC (optional AC adapter AD-5000-2 must be used) Power Consumption: 700mA Charging Time: Max. 3 hours Number of wireless microphones to be charged simultaneously: 2 pieces Operating Temperature: 32°F to +104°F Operating Humidity: 30% to 85% RH Finish: Case: ABS resin, metallic gray/ Microphone receptacle section: PPE resin, black Dimensions: 9.4 (W) × 4.1 (H) × 3.
UHF Wireless Microphone and Tuner Combination Sets 5000 Series Wireless Microphone Sets WS-5225 WS-5265 UHF Hand-held Wireless Microphone/Tuner Set WM-5225 + WT-5810 UHF Hand-held Wireless Microphone/Tuner Set WM-5265 + WT-5810 WS-5325M WS-5325U UHF Lavaliere Wireless Microphone/Tuner Set WM-5325 + YP-M5310 + WT-5810 UHF Lavaliere Wireless Microphone/Tuner Set WM-5325 + YP-M5300 + WT-5810 WS-5325H UHF Headset Wireless Microphone/Tuner Set WM-5325 + WH-4000H + WT-5810 86
Trantec Wireless S4.16 Series The new Trantec S4.16 Series is the evolution of the old TOA WS-200 & 300 “Passport” Series. The new systems provide better sonic performance, greater frequency agility and allow for use of more simultaneous channels.
Wireless Microphone Selection Guide 5000 Series UHF Wireless Selection Guide DESCRIPTION PRODUCT CODE COMPATIBLE WITH FREQUENCY BAND Please add the frequency band designation to the end of the part number. i.e.
Infrared Wireless Microphone Systems TOA’s Infrared Wireless Microphone System incorporates a range of conference and communication enhancing features that will appeal to users who want confidentiality as well as interference-free communication. Because the microphones use infrared signals, sensitive matters being discussed in a meeting room won’t leave the room, and the wireless microphones can be used in several adjacent classrooms simultaneously without interference.
IR-700D Infrared Wireless Distributor IR-702T MAIN FEATURES • Equipped with 4 receiver mixing outputs and 2 distribution outputs • By using the IR-700D in conjunction with IR-702T and YW-1022Y/ YW-1024Y, a system with up to 16 infrared receivers can be configurable • Rack-mountable with optional brackets (MB-WT3/MB-WT4) Power Source: AC mains 50/60Hz (supplied from the accessory AC adaptor) Power Consumption: 25W or less Input/Output: 4 mixing inputs, 2 distribution outputs Band-Pass Frequency: 3.
IR-500R Infrared Wireless Receiver Power Source: 24V DC (supplied from the IR-702T) Current Consumption: Max, 40mA Infrared Detector Wavelength: 870nm Carrier Frequency: Channel A: 3.100MHz/ Channel B: 3.350MHz Acceptance Angle: Vertical: 80° (up to 30° movable downward)/ Horizontal: 80° (up to 30° movable left or right) Communication Area: Approx.
IR Wireless Classroom System The IR Classroom System consists of an IR Integrated Wide-dispersion Ceiling Speaker (IR-820SP) with a built in Infrared Receivers and Amplifier, an IR Wireless Tuner (IR-802T) and hands-free (IR-300M) IR Wireless Microphone, all connected by one CAT-5 cable. This system provides uniform sound throughout the classroom.
Wired Microphone Systems Desktop Type Microphones PM-660U Paging Microphone Type: Moving coil microphone Polar Pattern: Unidirectional Rated Impedance: 600Ω, balanced Output Level: -58dB (1kHz, 0dB=1V/pa) Frequency Range: 100Hz – 10kHz Output: 5.0, 4-conductor (2-core shielded) cable (8.
Other Microphones EM-600 MAIN FEATURES Flush-Mount Boundary Microphone • Electret condenser microphone element with omnidirectional pattern for comprehensive pickup • Optimized to deliver best performance when used on a desk or attached to a ceiling • Low-cut filter reduces intrusive noise • Two rubber isolation rings are provided as an accessory to reduce vibration • Wide frequency range (30 Hz - 20 kHz) provides well-balanced sound with clarity and a good tonal response • Phantom power range of 9 to 52
Megaphones Hand Grip Type Megaphones Waterproof Hand Grip Type Megaphones TOA offers an extensive range of portable powered megaphones that provide optimal reinforcement for various applications in different environments such as schools, government organization facilities, factories and many others. All models incorporate anti-bacterial treatment to cope with multi-user environments.
Hand Grip Type Megaphones ER-520 (10W max.) MAIN FEATURES Power Source: R6P (AA) × 8 (12V DC) Output Power: Rated 6W, max. 10W Battery Life: Approx. 10hrs. (JEITA)* Audible Range: Approx. 250m (JEITA)* Diaphragm: Polyimide film Anti-bacterial Treatment: Mouth and handle Operating Temperature: -32°F to +104°F Finish: Horn; ABS resin, light gray/Handle, mouth and others; ABS resin, gray/Strap; Tetoron, black Dimensions: 6.3 (W) × 10 (H) × 10.2 (D)in Weight: 1.4lbs (without batteries) ER-520W (10W max.
ER-1215S (23W max.) MAIN FEATURES Hand Grip Type Megaphone with Siren HANDHELD MEGAPHONE • 23 Watt Maximum Output • 6 C Batteries (14 hrs) • Range: 315m (speech) / 500m (siren) • Anti-bacterial treatment for all models (mouthpiece/microphone and handle) • High durability ABS resin construction • Compact and lightweight • Wide frequency range for enhanced audio quality • Neodymium magnets and Polyimide speaker diaphragms Power Source: R14P (C) × 6 (9V DC) Output Power: Rated 15W, max.
ER-2230W (45W max.) MAIN FEATURES Shoulder Type Megaphone with Whistle • • • • • • • • • • • • • Power Source: Battery: R20P (D) × 10 (15V DC)/ External Power: 12V DC Battery Output Power: Rated 30W, max. 45W Signal Sound: Whistle (1.6 to 2.4kHz) Battery Life: Voice: Approx. 17hrs. (JEITA)*, Whistle; Approx. 90 minutes (JEITA)* Audible Range: Voice: Approx. 800m (JEITA)*, Whistle: Approx. 1000m (JEITA)* AUX Input Sensitivity: -10dB*1 (300mV), 10kΩ (3.
Hands-Free Type Megaphones ER-604W (10W max.) Compact Power Megaphone MAIN FEATURES SHOULDER MEGAPHONE • Shoulder megaphone with external handheld microphone, volume control and On/Off switch • Push button-activated whistle tone • External Microphone and Auxiliary inputs • Batteries: eight “AA” or external 12 VDC • Battery test indicator • Output Power: 10 W • Optional Headset Microphone: WH-4000H Power Source: R6P battery x 8 (12 V DC) 12V DC / 0.8A or more (AC adapter or DC power supply unit usable.
IP Network Intercom Systems N-8000 Series IP Network Intercom System The newly expanded N-8000 Series IP Network Intercom System offers flexible communications for up to 3,072 stations on existing corporate local and wide area data networks. It is a network-compatible intercom system using packet audio technology.
Exchanges N-8000EX (Internal: 4 links/External: 8 links) Network Intercom Exchange MAIN FEATURES • 10/100BaseTX Ethernet network connection • Occupies one network node ( 192 max.
N-8000AF Audio Interface Unit MAIN FEATURES • • • • • • • 10/100BaseTX Ethernet network connection Occupies one network node (192 max.) One MIC/LINE audio line input One audio line output Eight contact inputs Time Synchronization input Built-in timer and chime Power Source: 120V AC, 50/60Hz Power Consumption: 7W (Max.
N-8000RS Sub-Station Interface Unit MAIN FEATURES • 10/100BaseTX Ethernet network connection • Occupies one network node (191 max - at least one node must be a master station or N8000/8010EX exchange) • Up to 16 substations connectable using twisted pair shielded cable • Speech links: 2 N-8010RS Sub-Station Interface Unit MAIN FEATURES • 10/100BaseTX Ethernet network connection • Occupies one network node (191 max - at least one node must be a master station or N8000/8010EX exchange) • Up to 16 substat
Stations IP Master Stations N-8600MS IP Multifunctional Master Station MAIN FEATURES • System Allows Full-duplex conversation in Hands-free mode with new stations • External mic and headset connections for hands free operation • LCD, speed-dial, Power-over-Ethernet Power Source: Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option)) Power Consumption: Use of the AC adapter (12V DC: 2.
N-8540WP MAIN FEATURES N-8640DS Power Source: Power supply device that complies with IEEE802.3af standard or 12V DC (supplied from the AC adapter (option)) Power Consumption: Use of the AC adapter (12V DC: 3.5W (station only)) Use of the PoE (48V DC): 5W Speech Method: Hands-free conversation Audio Frequency Range: 300Hz – 7kHz Hands-free: Speaker: maximum output 0.5W, 8Ω, 5.7cm cone-type Mic.
N-8011MS Standard Hands-free Master Station MAIN FEATURES • Full-Duplex (aka: Duplex) communication is supported by this station (handset mode only) • Two-wire connection to N-8000EX or N-8010EX Exchange • Hands-free duplex communication Power Source: 48V DC (supplied from the network intercom exchange) Power Consumption: 1.8W (at rated), 2.4W (max.
MAIN FEATURES N-8033MS • • • • • Flush-Mount Master Station Especially for hospitals IP-65 rated outdoor in-wall Master Station. Chemical resistant for use in industrial/harsh environments. One input for use with foot switch dialing. Works with N-8000EX & N-8010EX using single twisted pair connection. Power Source: 48V DC (supplied from the IP network intercom exchange) Power Consumption: 1.8W (rated), 2.4W (max.
2-Core Shielded Type Stations (works with N-8000RS/N-8010RS) MAIN FEATURES Substation ECONOMY INDOOR REMOTE SUB-STATION • Provides half-duplex communication. • Hairline brushed stainless steel faceplate, #14 Gauge. • Connects to N-8000RS/N-8010RS. • May be programmed to communicate with a single master station. • Mounts in two-gang, 2” deep electrical box with adapter ring (supplied by other vendors). • Up to (16) sixteen RS-1XO Remote Stations can be used per N8000RS/N-8010RS exchange.
RS-140 MAIN FEATURES Switch Panel • • • • • RS-142 MAIN FEATURES RS-143 MAIN FEATURES Switch Panel SINGLE CALL BUTTON PANEL SWITCH • Connects to N-8000RS & N-8010RS exchanges via shielded twisted pair wire and 25V speaker for half-duplex communication with assigned master station. • Optional RS-141 handset may also be used. Call-In Switch: Momentary Wiring: Two-core shielded cable Transmission Range: 0.5km /0.5mm (AWG24) 0.8km /0.65mm (AWG22) 1.3km /0.
4-Wire Type Stations (works with N-8400RS) N-8410MS MAIN FEATURES FOUR-WIRE MASTER STATION • Low-cost analog Master Station operates on 4-wire connection with N-8400RS. • Complete system can be configured on one exchange with RS-4xx sub stations. Analog Standard Master Station Power Source: 24V DC (supplied from the sub station interface unit N-8400RS) Current Consumption: Max.
RS-481 Option Handset MAIN FEATURES • Indoor handset used with RS-480 Substation. • Overrides speaker connected to RS-140/RS-480 call panel and allows private conversation. Handset Receiver: Dynamic type Handset Transmitter: Electret condenser type Handset Receiver Volume Control: Side volume, Maximum attenuation level: 12 – 18dB Operating Temperatures: 32°F to +104°F Finish: ABS resin, pale white Dimensions: 4.6 (W) × 8.7 (H) × 2.8 (D)in Weight: 0.8lbs Accessory: Box mounting screw (No.
System Image 112
Classroom Sound Systems The new Scholastic & Academy Series-based Classroom Sound Systems are designed to be easy to specify, order and install. One model number gets you everything you need to achieve high-quality, reliable classroom sound and voice-lift. TOA Scholastic & Academy Series classroom systems help students learn better and allows teachers to communicate with less effort.
House of Worship System Packages The TOA Prophet, Chorus & Congregation House Of Worship System Packages are developed to offer the ultimate in cost-effective and easy-to-use sound reinforcement, designed specifically for smaller churches. These systems are built around the ground-breaking M-633D and D-901 Digital Mic/Line Mixers and the DA Series Digital Power Amplifiers, along with our Type H & Type S Slim Line Arrays and the extremely popular HX-5 Variable Dispersion Loudspeaker.
Speaker Mounting Accessories Set-Up Chart Speakers Wide-Dispersion Box Speakers F-1000BT F-1300BT F-1000WT F-1300WT F-1000BTWP F-1300BTWP F-1000W/TWP F-1300WTWP Installation Configurations Cluster Bracket Ceiling Mounting Bracket HY-CL10B HY-CM10B HY-CM10W HY-CM10B HY-CM10W Board Hanger Bracket HY-BH10B Pole Mounting Bracket YS-60B Speakers Wide-Dispersion Box Speakers F-2000BT F-2000WT F-2000BT-WP F-2000WT-WP Installation Configurations Cluster Bracket Ceiling Mounting Bracket HY-CL20B
Speaker Mounting Accessories Set-Up Chart Speakers Line Array Speakers Type A Indoor Use SR-A12L/SR-A12S/SR-A18B Outdoor Use SR-A12LWP/SR-A12SWP Installation Configurations Rigging Frame SR-RF12 SR-RF12WP Tilt Joint Plate SR-TP12 Speakers Line Array Speakers Type S SR-S4L SR-S4LWP SR-S4S SR-S4SWP Installation Configurations Extension Plate SR-EP4 SR-EP4WP SR-EP4 SR-EP4WP Wall Tilt Bracket SR-TB4 SR-TB4WP SR-TB4 SR-TB4WP Wall Mounting Bracket SR-WB4 SR-WB4WP SR-WB4 SR-WB4WP Stand Ad
Speaker Mounting Accessories Set-Up Chart Speakers Line Array Speakers Type C Indoor Use SR-C8L/SR-C8S/SR-C15B Outdoor Use SR-C8LWP / SR-C8SWP / SR-C15BWP Installation Configurations Rigging Frame SR-RF8 SR-RF8WP Cluster Bracket SR-CL8 Rigging Support Bracket SR-SB8 Tilt Joint Plate SR-TP8 Speakers Installation Configurations Line Array Speakers Type H SR-H2L SR-H2S SR-H3L SR-H3S Horn Speakers Installation Configurations Swivel Bracket SC-610/SC610T; SC-615/ SC-615T; SC-630/SC630T; SC-651 Y
Speaker Mounting Accessories Set-Up Chart Speakers Compact Array Speakers (HX-5 Series) HX-5B HX-5W HY-PF1B HY-PF1W HX-5B-WP HX-5W-WP FB-120B FB-120W HY-PF1B HY-PF1W Installation Configurations Rigging Frame Ceiling Mounting Bracket Mounting Bracket HY-PF1WP HY-CW1W HY-CW1B HY-WM1B HY-WM1W HY-WM2B HY-WM2W HY-CW1WP HY-WM1WP HY-WM2WP Extension Bracket HY-CN1B HY-CN1W Speaker Stand Adapter HY-CN1B-WP HY-CN1W-WP HY-ST1 Matching Transformer MT-200 Speakers Interior Design Speakers
Speaker Mounting Accessories Set-Up Chart Speakers Coaxial Array Speakers HS-1200BT HS-1200WT HS-1500BT HS-1500WT Installation Configurations Wall/Ceiling Mount Bracket Vertical Installation Wall/Ceiling Mount Bracket Horizontal Installation HY-1200VB HY-1200VW HY-1200HB HY-1200HW HY-1500VB HY-1500VW HY-1500HB HY-1500HW Ceiling Mount Bracket HY-C0801W HY-C0801 Wall Mount Bracket HY-W0801 Speakers HY-W0801W Surface Speakers Speakers BS-1030B BS-1030W FB-120 Installation Configurations
Speaker Mounting Accessories Set-Up Chart Speakers Ceiling Speakers - F Series F-122CU F-122CU2 F-1522SC F-2322C F-2322CU2 F-2352C F-2352CU2 F-2352SC F-2852C F-2852CU2 Installation Configurations Note: F-2352SC: When using the TB-F100 the HY-RR2 is required. Supplied with CU2 versions. Tile Support Rails HY-TB1 HY-TB1 Ceiling Reinforcement Ring HY-RR2 HY-RR1 HY-RR2 Trim Ring Note: F-2352SC: When using the HY-TR1 the HY-RR2 is required. Supplied with CU2 versions.
Amplifier Selection Guide Inputs Model Number A-2240 A-706 A-712 A-724 A-903MK2 A-906MK2 A-912MK2 P-906MK2 P-912MK2 P-924MK2 W-906A W-912A AV-20D BA-235 Power 240W 60W 120W 240W 30W 60W 120W 60W 120w 240W 60W 120W 20W x 2 35W BA-260 60W BG-220 20W BG-235 35W BG-2035 35W BG-2060 60W BG-2120 120W A-9060DHM2 60W x 2 A-9120DHM2 120W x 2 A-9060SM2 60W A-9120SM2 120W A-9240SHM2 P-9060DH P-9120DH CA-115 CA-130 CA-160 DA-250F 240W 60W x 2 120W x 2 15W 30W 60W DA-250D DA-500F-HL DA-550F Mic
List of UL Safety Certified Models A A-706 A-712 A-724 A-2240 A-903MK2 A-9060DHM2 A-9060SM2 A-906MK2 A-9120DHM2 A-9120SM2 A-912MK2 A-9240SHM2 AD-246 AD-0910 AD-1215P AD-5000-2 AD-5000-6 AV-20D D-971E D-971M D-971R D-972AE D-981 D-983 D-984VC DA-250D DA-250F DA-250FH DA-500F-HL DA-500F DP-K1 DP-L2 DP-SP3 B BA-235 BA-260 BC-900 BG-220 BG-235 BG-2035 BG-2060 BG-2120 I IR-802T IR-820SP D D-2000AD1 D-2000CB D-2000DA1 D-2008SP D-901 D-911 D-921E D-921F D-922E D-922F D-923AE D-936R N-8010RS N-8011MS N-8020MS
List of UL2043 Certified (Plenum Rated) Models AV-20D IR-820SP PC-580RU (when installed with the back can HY-BC580) PC-580RVU (when installed with the back can HY-BC580) F-122CU F-122CU2 F-2322C F-2322CU2 F-2352C F-2352CU2 F-2852C F-2852CU2 List of UL1480 UUMW Certified Speakers F-122CU2 PC-580RU PC-580RVU UL1480 UUMW is the code for speakers for Fire Protection Signaling System, which allows for the use in Mass Notification Systems.
124
Model Description Page # 507-07-239-50. . . Ceiling Spkr. . . . . . . . . . . . . . 120 507-07-240-30. . . Ceiling Spkr. . . . . . . . . . . . . . 120 A A-706. . . . . . . . . . Mixer/Amp. . . . . . . . . . . . . . . . 20 A-712. . . . . . . . . . Mixer/Amp. . . . . . . . . . . . . . . . 20 A-724. . . . . . . . . . Mixer/Amp. . . . . . . . . . . . . . . . 20 A-2240. . . . . . . . . Mixer/Amp. . . . . . . . . . . . . . . . 26 A-903MK2. . . . . . Modular Mixer/Amp. . . . . . . . . 18 A-9060DHM2. . . . Dig.
Model Description Page M M-01F . . . . . . . . . 900 Modules. . . . . . . . . . . . . . 23 M-01M. . . . . . . . . 900 Modules. . . . . . . . . . . . . . 23 M-01P . . . . . . . . . 900 Modules. . . . . . . . . . . . . . 23 M-01S . . . . . . . . . 900 Modules. . . . . . . . . . . 17, 23 M-03P . . . . . . . . . 900 Modules. . . . . . . . . . . . . . 23 M-11S . . . . . . . . . 900 Modules. . . . . . . . . . . 17, 23 M-21S . . . . . . . . . 900 Modules. . . . . . . . . . . 17, 23 M-243 . . . . . . . . .
Model Description Page U U-01F. . . . . . . . . . U-01P . . . . . . . . . U-01R . . . . . . . . . U-01S . . . . . . . . . U-03R . . . . . . . . . U-03S . . . . . . . . . U-11R . . . . . . . . . U-11S . . . . . . . . . U-12S . . . . . . . . . U-13R . . . . . . . . . U-13S . . . . . . . . . U-14R . . . . . . . . . U-21S . . . . . . . . . U-43R . . . . . . . . . U-43S . . . . . . . . . U-61S . . . . . . . . . 900 Modules. . . . . . . . . . . . . . 23 900 Modules. . . . . . . . . . . . . . 23 900 Modules. .
TOA Electronics www.toaelectronics.com Specifications are subject to change without notice.
