Operation Manual

- Special functions -

9.5 Accepting calls automatically

Incoming calls are accepted automatically when you lift the receiver from the base station. If you

only want calls to be accepted by means of the

button, you can deactivate the automatic

acceptance facility.

1. Press the menu button

2. Select the HANDSET menu with and and confirm with

3. Select the AUTO ANSWER function with and and confirm with

4. Select ON or OFF with and and confirm with

5. Now select further menu functions or exit the menu by pressing and holding the

button.

9.6 Tone (TD) or pulse (PD) dialling

This feature enables you to use your telephone both on analogue exchanges (PD) and on the

new digital exchanges (TD). The factory setting is TONE dialling.

1. Press the menu button

2. Select the SETUP menu with and and confirm with

3. Select the DIAL MODE function with and and confirm with

4. Select the required dialling mode with and and confirm with

5. Now select further menu functions or exit the menu by pressing and holding the

button.

9.7 Changing display names

In normal operation, the message "STUDIO 80" appears in the display. If you have logged on

several handsets to one base station, it can be useful to give each handset its own name. The

number after the name shows with which number the handset can be called internally.

1. Press the menu button

2. Select the HANDSET menu with and confirm with

3. Select the NAME function with and and confirm with

4. Now enter the required name using the number pad. Letters already entered can be

deleted by repeatedly pressing the

button.

5. Confirm with

6. Now select further menu functions or exit the menu by pressing and holding the

button.