Operation Manual

- Special functions -

9.10 Setting the display language

The display messages can be set up in German, Italian, English, French and

Danish/Norwegian/Swedish.

1. Press the menu button

2. Select the HANDSET menu with and and confirm with

3. Select the LANGUAGE function with and and confirm with

4. Select a language with and and confirm with

5. Exit the entry mode by holding the button pressed.

9.11 Setting the FLASH time

1. Press the menu button

2. Select the SETUP menu with and and confirm with

3. Select the RECALL function with and and confirm with

4. Select the flash time FLASH 1 (100ms) or FLASH 2 (300ms) with and and confirm

with

5. Exit the entry mode by holding the button pressed.

9.12 Restoring factory settings

The handset and the base station are reset to the factory settings using this function. The phone

book, the caller list (CLID) and all phone numbers in the redial facility will be deleted.

Factory settings:

Language: German Handset name: STUDIO 80

Battery warning tone: On Automatic call accept: On

Range warning: On External ring tone: 3

Button click: On Internal ring tone: 1

Receiver volume: 3 Handset ring tone volume: 3

Pin code: 0 0 0 0 Base ring tone: 2

Pause: 3 sec. Base ring tone volume: 3

Dialling method: MV/Tone FLASH time: 100ms

1. Press the menu button

2. Select the SETUP menu with and and confirm with

3. Select the DEFAULT function with and and confirm with

4. Enter the PIN code using the number pad (factory setting 0000) and confirm with

The message CONFIRM? will appear in the display.

5. Confirm with the menu button

6. After a short time, the factory settings will be restored. The display will indicate the ready

mode once more.