Operation Manual

- Operation -
49
4.10 Adjusting the receiver volume
If the receiver volume is too quiet or too loud for you, you can change this to suit your
requirements.
You can adjust the volume during a call by means of the
and buttons. The selected
volume will be shown in the display with the message EAR VOL 1 to 5.
4.11 Redial facility
You can use the redial facility if the person called is engaged or does not reply. Your telephone
remembers the last five numbers dialled.
4. Press the
P
/
button and the last phone number dialled will be shown in the display.
5. Further redial numbers can now be selected using the button. The button is used to
page back through the list.
6. Now press the call button and the telephone number displayed will be automatically
dialled.
Note: If the redial number is stored in the phone book, the name will automatically appear in the
display instead of the phone number.
Deleting redial numbers
To delete an individual number from the redial list, proceed as follows:
1. Press the
P
/
button and select the redial number that is to be deleted by means of the
and buttons.
2. Press the
C/
button and the display will show DELETE?.
3. Confirm with the menu button
/
and the telephone number will be deleted from the redial
list.
Deleting all redial numbers
To delete all numbers from the redial list, proceed as follows:
1. Press the
P
/
button.
2. Hold the
C/
button pressed until DELETE ALL? appears in the display.
3. Confirm with the menu button
/
and the telephone number will be deleted from the redial
list.
4.12 Keypad lock
If you frequently carry the handset with you, you can lock the keypad so that buttons are not
pressed unintentionally. Incoming calls can be received as normal when the keypad lock is
switched on.
Activating the keypad lock
Press the
button on the handset for three seconds. The symbol will appear in the
display.
Deactivating the keypad lock
To deactivate the keypad lock, press the
button twice.
Note: The keypad lock can also be activated via the menu.