User guide

1-866-AMPLICOM (267-5426)

USE ON A PRIVATE BRANCH EXCHANGE

Set the dial mode

There is a choice of two dialing modes: tone and pulse. The default setting is

TONE and this is the correct setting for use within the United States.

To change the dial mode

1. Open the menu by pressing , scroll using or until Base settings

is highlighted and press

2. Scroll using

or until Dial Mode is highlighted and press .

3. The current dial mode setting (e.g. Tone) is displayed.

4. Choose the dial mode setting required (Tone or Pulse) using

or and

press

Reset to default settings

Important: Reseting to default will NOT delete phone book entries.

To reset to default settings

1. Press for 10 seconds.

2. Con rm or cancel the reset to default settings by pressing

or .