Operating instructions

Operating the Walkie-Talkies
/
Press ▲ or ▼ to start scanning.
When a signal is detected the unit will pause.
/
Press ▲ or ▼ to continue scanning.
Press the PTT button to communicate or to quit scanning mode.
Scanning DCS
With this function activated the handset will continuously scan through all DCS
channels for the preset channel until it finds one on which another user is transmit-
ting.
7 x Press the menu key 7 times.
/
Press ▲ or ▼ to start scanning.
When a signal is detected the unit will pause.
/
Press ▲ or ▼ to continue scanning.
Press the PTT button to communicate or to quit scanning mode.
Transmit ringing tone
The ringing tone indicates to other subscribers that you want to talk to them.
A condition for this is that the other subscribers are using the same channel and
CTCSS / DCS code.
Send ringing tone.
Selecting the ringing tone
There are 10 ringing tones available for selection.
8 x Press the menu key 8 times.
/
Select the ringing tone. Confirm with the PTT button.
Setting the signalling mode
You can select whether a call should be signalled by the ring ton, the vibrator or
both ringtone and vibrator.
9 x Press the menu key 9 times.
Service-Hotline Germany: Tel. [phone] (Costs for call from german
landline at time of print: 14 ct/min, max. 42 ct/min from mobile phone providers.)
11
GB