Operation Manual

- Special functions -
36
6.3 Handset ring tone volume
The volume of the ring tone on the handset can be adjusted in three steps. If
you should not want to be disturbed, you can also switch off the ring tone
altogether. If the ring tone is switched off, incoming calls are signalled only at
the base station and the other handsets.
1. Press the button.
2. Press the star button * and the number 4 on the number pad.
3. Now select the required volume using the buttons 1, 2 or 3. To
switch the ring tone off, press 4.
4. Exit programming with the button.
6.4 Logging off handsets
A handset can only be logged off using another handset, which is still logged
on. It is therefore not possible to log off using the handset that is to be logged
off. If you want to log off the AUDIOLINE miniDECT5000, you must find out
how to do this from the instruction manual for the handset you are using for
logging off. If you want to use the AUDIOLINE miniDECT5000 to log off
another handset, proceed as follows:
1. Press the button.
2. Press the star button * and the number 9 on the number pad.
3. Now enter the internal call number for the handset to be logged
off.
4. Enter the PIN code for the base station using the number pad and
confirm with . You will hear a signal tone in confirmation.
6.5 Checking internal call numbers
If you have forgotten the internal call number of the handset, you can check
this as follows:
1. Press the button.
2. Press the star button * and the numbers 7 and 1 on the number
pad.
3. Now press the button once more.
4. The number of signal tones that you will now hear tells you the
internal call number.