Operation Manual

- Operation -
31
4.4 Connecting external calls to another handset
If you have accepted an external call on one handset, you can transfer the
external call to another handset.
To do this, press the
INT
button and then the number of the required
handset. After the internal call has been accepted at the other handset you
have the following alternatives:
A. Consultation / Brokering:
You can now talk to the internal party and revert to the external caller by
pressing the
INT
button. You can swap between the external and internal
calls as often as you wish.
B. Transferring the call:
The external call is transferred to the receiving handset by pressing the call
button
on the first handset.
You can also transfer the external call directly to a handset without
consultation by dialling the internal number using the
INT
button and then
pressing the call button
.
4.5 Making conference calls
An external call can be connected to another internal party to make a
conference call. In this way, two internal handsets can speak to the external
party at the same time.
Set up the required call to the external party. Then press
INT
button and
the internal number of the required handset.
When the second internal party has accepted the call, press the # button and
all three parties will be connected together on a conference call.
Note: Conference calls will only work if the base station used supports this
function.