Operation Manual

- Operation -
30
4 Operation
4.1 Receiving external calls
When a call comes through, the ringing tone will sound on the handset.
The operating status indicator on the handset will flash. Press the small call
button on the headset or the call button
on the handset and the
connection will be made.
To end the call, press the small call button on the headset or the call button
on the handset.
Note: By assigning a priority at the base station, a different handset
connected to the base station can be made to ring first before an external call
is transferred to the miniDECT5000. For more information refer to the
appropriate instruction manual.
4.2 Making external calls
Press the call button and you will obtain a dialling tone.
Enter the required telephone number using the number pad.
To end the call, press the small call button on the headset or the call button
on the handset.
Note: The call will not be ended by closing the handset cover.
4.3 Making internal calls
To do this, press the
INT
button and then the number of the required
handset.
The call is accepted by pressing
button on the handset called.