Operation Manual

- Commissioning -

3.6 Assembling the charging pod

Note: If you do not want to use the charging pod, you can also connect the

small plug of the power supply directly to the handset.

To open the pod, press on the sides of the upper

section and pull the two halves apart.

Now place the small plug in the retainer provided for the

purpose in the lower section of the pod and feed the

cable through the small opening.

Close the pod by replacing the upper section. Press the

two halves firmly together until they audibly engage.

Now connect the plug-in power supply to a mains socket.

3.7 Charging the battery

Your telephone's rechargeable battery has a standby time

of a maximum of 150 hours at room temperature and a

maximum talk time of up to 12 hours.

If the battery capacity is too low, you will hear a warning

tone every 10 seconds and at the same time the battery

condition indicator in the display will flash.

To charge the battery, connect the handset to the charging

station.