Operation Manual

18
Putting the Telephone into Operation
28
Inserting the batteries
Insert the 3 standard batterys in the open bat-
tery compartment. When replacing the batte-
ries, only use ones of the same type. Close
the battery compartment.
Charging the batteries
Before the handset is used for the first time, insert it in the base station/charging station for
at least 14 hours.
When the handset is inserted in the base station properly, you will hear a confirmation si-
gnal and the charge control l amp lights up. The handset warms up during the charging
process. This is normal and does not represent a risk. Do not charge the handset with
charging units from other manufacturers. The current battery charge status is indicated
on the display:
Full Half empty Low Empty
Setting the time on the handset
The information on Page 38 explains how to set the time on the handset.
Private branch exchanges
The information on Page 35 explains how to install your telephone in a private branch ex-
change.
-- AAA +
+ AAA --
-- AAA +