Operation Manual

- Special functions -

1. Press the menu button .

2. Select the SETUP menu with and and confirm with .

3. Select the DEFAULT function with and and confirm with .

4. Enter the PIN code using the number pad (factory setting 0000) and confirm with .

The message CONFIRM? will appear in the display.

5. Confirm with the menu button .

6. After a short time, the factory settings will be restored. The display will indicate the

ready mode once more.

Note: If you have forgotten the PIN code, you can also restore the factory settings without it.

1. Remove a battery from the handset.

2. Hold the button pressed and replace the battery. Hold the button pressed until

the message DEFAULT appears in the display.

3. Confirm with and the factory settings will be restored. You can abort the process

by pressing the button.