Operation Manual

- Special functions -

8.10 Setting the display language

The display messages can be set up in German, Italian, English, French and Nederlands.

1. Press the menu button .

2. Select the HANDSET menu with and and confirm with .

3. Select the LANGUAGE function with and and confirm with .

4. Select a language with and and confirm with .

5. The language will be changed over after a short time and the display will indicate that it

is ready once more.

8.11 Setting the FLASH time

1. Press the menu button .

2. Select the SETUP menu with and and confirm with .

3. Select the RECALL function with and and confirm with .

4. Select the flash time FLASH 1 (100ms) or FLASH 2 (300ms) with and and

confirm with .

5. Exit the entry mode by holding the button pressed.

8.12 Restoring factory settings

The handset and the base station are reset to the factory settings using this function. The

phone book, the caller list (CLID) and all phone numbers in the redial facility will be deleted.

Factory settings:

Language: German Handset name: DECT8048

Battery warning tone: On Automatic call accept: On

Range warning: On External ring tone: 3

Button click: On Internal ring tone: 1

Receiver volume: 3 Handset ring tone volume: 3

Pin code: 0 0 0 0 Base ring tone: 2

Pause: 3 sec. Base ring tone volume: 3

Dialling method: MV/Tone FLASH time: 100ms