Operation Manual

ManualsBrandsAudioline ManualsTelephonesDECT6800 Bundle

100

− Advanced Functions −

13.5 Prefix

The prefix" function enables a number to be dialled automatically before the actual

phone number. This is mainly implemented when using call−by−call numbers. Various

area access codes can be assigned to a call−by−call number or you can dial the same

call−by−call number before every call. In the case of calls dialled from the phone book

in which the area access code stored is the same, the stored call−by−call number is,

naturally, also prefixed.

Up to three different call−by−call numbers, each with 5 digits, can be stored. The

automatically prefixed call−by−call numbers do not appear in the display preceding the

dialled number.

Note: If the Call button  is pressed first and then a phone number dialled, no

stored call−by−call number is prefixed.

 , 





Select menu and confirm



&



Select function and confirm

,



Enter the PIN code and confirm

,



Select the memory location and confirm

 , 





Select the setting required

 ,  Enter the call−by−call number

 , ,



Enter the area access code and confirm

Note: If no access code is entered in the  field, the call−by−call number entered

in the  field is dialled before all phone numbers.

13.6 Outside line

In the case of private branch exchanges, it is necessary to dial a specific number (e.g.

9" or 0") in order to obtain the dialling tone for an outside line. The number for the

outside line can be predialled automatically.