Operation Manual

− Operation −

6.13 Temporary tone dialling

If you only operate the telephone using the Pulse dialling method (refer to Chapter

13.2), you can still make use of the advantages of the Tone dialling method

(e.g.: remote access of the answering machine).

During a call, you can temporarily switch to Tone dialling.

 Press for 1 second during a call

The character



appears in the display. When the call is ended, the equipment

automatically switches back to PULSE dialling.

6.14 Chain dialling

The chain dialling function is used in more complex telephone services, e.g. for

telephone banking, call−by−call or calling card procedures. The function is used to

transfer numbers stored in the phone book (e.g. bank account number) while a call is

actually in progress. It is also possible to combine numbers for transfer from the

phone book with numbers entered manually (e.g. PIN number). The example below

explains the use of the chain dialling function in connection with a calling card

procedure.

Note: A calling card is a virtual telephone card. This telephone card contains your

secret PIN and calling card number.





Scroll up or down

,  Select the calling card number and dial the

number

Note: The message received from the calling card provider requests your PIN.

 Enter the PIN number

Note: PINs should not be stored in the phone book to protect them from misuse.



, 





Select menu and confirm

,





Select entry and confirm

Note: You can link as many entries as necessary from the phone book when a

connection is established.