Operation Manual

- Special Functions -
82
9.1.1 Setting the handset ringing tone
1. Press the Menu button
F.
2. Press the
B and E buttons to select
the “Handset ringer” menu (
q).
3. Confirm by pressing the
F button.
4. Press the
B and E buttons to select a
melody.
5. Confirm by pressing the
F button.
6. Press the
B and E buttons to select
the required volume level or AUS (off).
Note: If the ringing tone has been deactivated, the
k icon appears
in the display. Incoming calls are then only indicated by the
base station.
7. Confirm by pressing the
F button.
9.1.2 Setting the base station ringing tone
1. Press the Menu button
F.
2. Press the
B and E buttons to select
the “Base ringer” menu (
q).
3. Confirm by pressing the
F button.
4. Press the
B and E buttons to select a
melody.
5. Confirm by pressing the
F button.
6. Press the
B and E buttons to select
the required volume level or AUS (off).
Note: If the ringing tone has been deactivated, incoming calls are
only indicated by the handset, not by the base station.
7. Confirm by pressing the
F button.
ldqtumv
000000000)(0
kjieghf
ldqtumv
MELODIE 1)
kjieghf
ldqtumv
LAUTST 1 )(
kjieghf
ldqtumv
000000000)(0
kjieghf
ldrs
MELODIE 1)
kjieghf
ldrsv
LAUTST 1 )(
kjieghf