Operation Manual

- Multiple Handsets -

11.3 Transferring external calls to another handset

If you have taken an external call on a handset, the call can be transferred to another

handset.

To do this, press the

G button and then the number of the required handset.

Note: If the handset called does not answer, take the call back by pressing the

button.

After the internal call has been taken by the handset called, the following options are

available:

1. Consultation / Brokering: You can talk to the party using the other handset

and then return the external caller by pressing

G. You can s witch between

the external and internal parties as often as necessary.

2. Transfer call: By pressing the

C button on the first handset, the external

call is transferred to the handset called.

11.4 Conference calls

An external call can be transferred to another internal handset for a conference call.

This enables two handset users to confer with the external caller at the same time.

1. Establish the required connection to the external caller.

2. Then press the

G button and enter the number of the required second

handset.

3. When the second, internal handset user has taken the call, press the

button for 2 seconds and all three parties are connected in a conference

call.

Note: During a conference call, press the

G button to put the external caller on

hold. Press the

G button again for 2 seconds to reactivate the c onference

function.

4. The conference is terminated by one of the handset users ending the call.