Operation Manual

- Special Functions -
80
9.2.5 Restoring the default settings
This function resets the handset and base s tation settings to their status on leaving
the factory.
Default settings:
Language: German Ringing melody, handset: 1
Backlight: On Ringing volume, handset: 3
Key tone: On Ringing melody, base station: 1
Receiver volume: Middle Ringing volume, base station: 3
Dialling method: Tone Flash time: Flash 1 (100 ms)
PIN code: 0000 Answering machine: On
PIN code, remote access: 000 Call delay: 2 rings
1. Press the Menu button B.
2. Press the
B and E buttons to select the SETTINGS
menu.
3. Confirm by pressing the
F button.
4. Press the
B and E buttons to select the RESET menu.
5. Confirm by pressing the
F button.
Note: Press the
C button to stop the Reset process.
6. Confirm by pressing the
F button again.
7. The default settings are restored after a short time.
The display then indicates the equipment is ready to
operate.
9.2.6 Setting the display language
The display information is available in German and English.
1. Press the Menu button
B.
2. Press the
B and E buttons to select the LANGUAGE
menu.
3. Confirm by pressing the
F button.
4. Press the
B and E buttons to select the required
language. Confirm by pressing the
F button.
5. Press the
C button to exit from the menu.
defghijkl
SETTINGS )(
nop
defghijkl
RESET (
nop
defghijkl
RESET?
nop
defghijkl
LANGUAGE (
nop
defghijkl
ENGLISH )
nop