Operation Manual

- Special Functions -
79
9.2.3 Setting the Flash time
As already mentioned in Chapter 8, two Flash times are available for selection,
namely 100 ms or 300 ms.
1. Press the Menu button
B.
2. Press the
B and E buttons to select the SETTINGS
menu.
3. Confirm by pressing the
F button.
4. Press the
B and E buttons to select the RECALL
menu.
5. Press the
B and E buttons to select the Flash time RECALL1 (100 ms) or
RECALL2 (300 ms). Confirm by pressing the
F button.
6. Press the
C button to exit from the menu.
9.2.4 Tone or Pulse dialling method
This future-oriented feature enables the telephone to be connected and used on both
analogue (pulse dialling) and digital (tone dialling) exchanges. Tone dialling is set at
the factory.
1. Press the Menu button
B.
2. Press the
B and E buttons to select the SETTINGS
menu.
3. Confirm by pressing the
F button.
4. Press the
B and E buttons to select the DIALMODE
menu.
5. Press the
B and E buttons to select the required
dialling mode, TONE or PULSE. Confirm by pressing the
F button.
6. Press the
C button to exit from the menu.
defghijkl
SETTINGS )(
nop
defghijkl
RECALL )(
nop
defghijkl
SETTINGS )(
nop
defghijkl
DIALMODE )(
nop