Operation Manual

-StartingUp-
63
4.5 Inserting the standard batteries
In order to insert the rechargeable standard batteries in the handset, press on the top
edge of the battery compartment cover and slide it downwards. Insert the standard
batteries, paying attention to correct polarity. Close the battery compartment cover.
4.6 Charging the standard batteries
Place the handset, with its display facing the front, for at least 14 hours in the base
station or charging station. The charging control lamp
à lights up. Failure to charge
the standard batteries properly can lead to telephone malfunction.
The rechargeable standard batteries in the handset have a maximum standby time of
110 hours at room temperature. The maximum talk time is 8 hours.
The current battery charge status is indicated in the display:
d c b a
Full Half empty Low Empty
When the battery charge level is v ery low, the “LOW BATT” message appears in the
display.
4.7 Tone or Pulse dialling method
This future-oriented feature enables the telephone to be connected and used on both
analogue (pulse dialling) and digital (tone dialling) connections. The equipment is set
to TONE dialling (DTMF) at the factory. If the telephone does not work on your
telephone connection, refer to Chapter 9.2.4 to learn how to switch the telephone to
pulse dialling.