Operation Manual

- Special functions -

8.2.4 Tone (TD) or pulse (PD) dialling

This feature enables you to use your telephone both on analogue exchanges (PD) and on

the new digital exchanges (TD). The factory setting is TONE dialling.

1. Press the menu button .

2. Select the SETTINGS menu with and and confirm with .

3. Select the DIALMODE function with and and confirm with .

4. Select the required dialling mode TONE or PULSE with and and confirm

with .

5. Now select further menu functions or exit the menu by pressing and holding the

button.

8.2.5 Restoring factory settings

The mobile unit and the base station are reset to the factory settings using this function. Do

it for the second handset separately.

Factory settings:

Language: German Ring tone: 1

Light On Ring tone volume, mobile unit: 3

Button click: On Ring tone, base: 1

Receiver volume: Medium Ring tone volume, base: 3

Dialling mode: Tone dialling FLASH time: FLASH 1 = 100ms

1. Press the menu button .

2. Select the SETTINGS menu with and and confirm with .

3. Select the RESET function with and and confirm with . The message

RESET? will appear.

4. Confirm with the button.

5. After a short time, the factory settings will be restored. The display will indicate the

ready mode once more.

8.3 Setting the display language

The display messages can be set up in German and English.

1. Press the menu button .

2. Select the LANGUAGE menu with and and confirm with .

3. Select a language with and and confirm with .

4. Now select further menu functions or exit the menu by pressing and holding the

button.