Operation Manual

- Operation -
41
4.7 Call duration display
The call duration in minutes and seconds is shown in the display during a call. Ten seconds
after dialling, the display will switch from showing the number dialled to showing the duration
of the call. The call duration will still be retained in the display for a few seconds after the call
has been ended.
4.8 Adjusting the receiver volume
If the receiver volume is too quiet or too loud for you, you can change this to suit your
requirements.
You can adjust the volume in three steps during a call by means of the
and
buttons.
4.9 Redial facility
You can use the redial facility if the person called is engaged or does not reply. Your
telephone remembers the last five numbers dialled.
1. Press the button and the last phone number dialled will be shown in the display.
2. Further redial numbers can now be selected using the and buttons.
3. Now press the call button and the telephone number displayed will be
automatically dialled.
Note: If the redial number is stored in the phone book, the name will automatically appear in
the display instead of the phone number.
Deleting redial numbers
To delete an individual number from the redial list, proceed as follows:
1. Press the button and select the redial number that is to be deleted by means of
the and buttons.
2. Press the button and the display will show DELETE?.
3. Confirm with the menu button and the telephone number will be deleted from the
redial list.