Operation Manual

− Starting Up −

2.5 Charging the standard batteries

When preparing to use the handset for the first time, place it in the base

station, with its display facing, the front for at least 14 hours. When the

handset is placed in the base properly, an acoustic signal is issued as

confirmation. Failure to charge the standard batteries properly can lead

to telephone malfunction.

The rechargeable standard batteries in the handset have a maximum

standby time of 110 hours at room temperature. The maximum talk time

is 8 hours.

The current battery charge status is indicated in the display:

Full Half empty Low Empty

When the battery charge level is very low, the

BATTERIE

message

appears in the display.

2.6 Registering DECT A 181 handsets

2 sec  {ª} Press the Paging button on the base

station

O Open the main menu

- or .

, O Select and open the submenu

The handset is assigned an internal call number. The handset

already registered has the internal call number 1. The second

handset registered is assigned the internal call number 2. This

internal call number appears in the display to the right of the

name of the telephone.

2.7 Registering a handset on a DECT/GAP base station from

another manufacturer

Follow the instructions in the operating manual from the original

manufacturer to set the base station from the external manufacturer to

Registration mode. Use the PIN code from the external manufacturer for

the registration.

O Open the main menu

- or .

, O Select and open the submenu